Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: doctorq on November 20, 2005, 11:50:57 AM

Title: Anyone using a Seagate Cheetah SCSI harddrive??
Post by: doctorq on November 20, 2005, 11:50:57 AM
I'm looking for some new harddrives for my computer, and during my search for a SCSI drive I came across the Seagate Cheetah drive, which claims to only make as much noise as 0.32 DB. Since I want a low noise system, this should suit my needs, but...

Since even the most quiet fans only go down to around 12 DB, I'm thinking it is an error on the page, so it instead should have been 32 DB. So, what does you Cheetah users say? Is it quiet or not?
Title: Re: Anyone using a Seagate Cheetah SCSI harddrive??
Post by: BenShep on November 20, 2005, 01:03:38 PM
probably a mistake.. the only cheetah drives I have had, have been bloody noisy.
Title: Re: Anyone using a Seagate Cheetah SCSI harddrive??
Post by: Effy on November 20, 2005, 01:25:37 PM
DoctorQ : make sure you have a cable for such a drive as there are several scsi connectors on the market and 50 pins is getting too old these days ...
Title: Re: Anyone using a Seagate Cheetah SCSI harddrive??
Post by: Argus on November 20, 2005, 02:05:01 PM
I bought a couple 18Gb Barracuda SCA Ultra3 drives a while back and use them as my main system drives on a CyberstormPPC and GVP4060.  They are not exactly 'quiet' but give the Amiga a 'workstation-power' type sound.  I like them (fast as hell too).  You do need the 80-pin to whatever scsi-pin# adaptors.
Title: Re: Anyone using a Seagate Cheetah SCSI harddrive??
Post by: mechy on November 20, 2005, 03:01:47 PM

I am using some IBM UWscsi 10,000rpm  drives off my csppc,they are pretty quiet,if not the quietest drive's i ever had.they dont seem to run as hot as seagates either.
pretty fast too.

Mike
Title: Re: Anyone using a Seagate Cheetah SCSI harddrive??
Post by: Amigaz on November 20, 2005, 03:17:22 PM
My 18 gig 10k rpm Quantum Atlas here in my PPC A4000 is quite noisy.
The 18 gig 15k rpm Maxtor Atlas I use as my system disk in my PC is quiet so that would be a good choice for you :)
Title: Re: Anyone using a Seagate Cheetah SCSI harddrive??
Post by: nex4060 on November 20, 2005, 03:38:26 PM
the new SCSI harddrives use fluid barings and are very quiet. Get a 15K rpm as thoes are quietest in a subjectiv test
Title: Re: Anyone using a Seagate Cheetah SCSI harddrive??
Post by: melott on November 20, 2005, 05:30:13 PM
Depending on how much drive space you want/need....
I am using Quantum FireBall 3.2 gig 7200 rpm 50 pin
SCSI drives in my A3k's. They are quiet and fast and
need no adaptors. I personally don't care for Seagate
drives, they are (in my opinion) noisy and harder to
work with.
My drive of choice is the Quantum FireBall.
Title: Re: Anyone using a Seagate Cheetah SCSI harddrive??
Post by: Piru on November 20, 2005, 05:35:51 PM
Quote
I personally don't care for Seagate drives, they are (in my opinion) noisy...

That was probably true 5-10 years ago. These days Seagate hds are one of the quietest and most reliable around. They come with 5 year warranty and all.

SCSI is mostly meant for server use, and there the low noise isn't the most important factor, though.