Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: The_Killer on November 05, 2005, 04:41:17 PM
-
Hi !
I have a strange heat problem with my Amiga 3000D.
So i need new Chip's ( U202/U203 ).
The old PALs was ( 16L8DNC ) and i want to burn to new GALs 16V8.
But i can't burn .pld files ( GALEP-IV prommer ) so i need the JEDEC Files.
Has everyone the JEDEC Files from U202 and U203 or can everyone convert the PALs to JEDEC ?
The PALs have found at "The Dave Haynie Archives".
http://www.thule.no/haynie/systems/amiga3k/pals/newsys/
Sorry for my bad English...
Best regards,
The_Killer
-
Take a look at http://www.geocities.com/mwinterhoff/jedec.htm (http://www.geocities.com/mwinterhoff/jedec.htm)
That's what I found on upgrading my A3640 to 3.2, but haven't tried it yet.
-
As far as I know you have to compile them to recreate a JEDEC file suitable for the GAL or PAL model you will use. AMD (I believe) had a shareware compiler a way back... sure can still be found.
-
@Zac67
@hppacito
I have taste the Tool's PALASM, WINCUPL, OPALJR... but i don't understand it !
Can erveryone convert the files ( u202.pld, u203.pld ) from "The Dave Haynie Archives" to jedec ?
Kind regards,
The_Killer
-
Hi,
I could probably convert the files but I doubt I will be able to anything until the weekend.
What manufacturer of PAL device are you using?
What is the part number?
This helps me to compile for the right device, if I can.
Ian
-
Thank's for your help but i have the Jedec Files and programmed it to "GAL16V8D-10LP" and now i taste my Machine.
At this moment i can say it's run very stable without any problem ! :-)
The ROM's with the converted Pals to Jedec now are:
- U202
- U203
- U714
The one that i need to convert is the "U701".
Kind regards,
The_Killer
-
Great!
Could you put them up for download somewhere? Or send them to me so I'd do it?
-
Hi !
Yes, i will upload the Files if the last one "U701" is ready.
Please wait.....
Kind regards,
The_Killer