Amiga.org

Amiga computer related discussion => Amiga Marketplace => Topic started by: Beowulf on October 31, 2005, 07:29:50 AM

Title: SANA2 driver
Post by: Beowulf on October 31, 2005, 07:29:50 AM: Hi

I have a ethernet card for my A1200.
I was wondering which SANA2 driver i need. There are a few on aminet but they seem to be for specific cards and configerations.
Do I need the generic SANA2 ppp device driver or something else?
Title: Re: SANA2 driver
Post by: Matt_H on October 31, 2005, 08:02:42 AM: What card is it?
Title: Re: SANA2 driver
Post by: Beowulf on October 31, 2005, 08:12:47 AM: It is a Pretec 10BaseT pcmcia LAN card.
The cnet device site said it is supported by the latest cnet device driver.
Title: Re: SANA2 driver
Post by: mfilos on October 31, 2005, 08:18:12 AM: Hi, I also have one question concerning this thing. I have a 3Com Ethernet NIC (5869) which plays alright with it's bootable floppy (AmiTCP Installed in a specific IP address). I tried installing the NIC using Genesis on OS 3.9 but the Wizard tells me that It can't open the device. I used 3c5869.device and cnet.device with no success.
I know that the bootable disk uses the 3c5869.device and runs perfectly? Does anyone know what to do?

--------
[color=CC6600]Marios Filos[/color]
[color=000099]- Amiga A600 (with 3.1 ROM)[/color]
[color=000099]- M-TEC 68030@42Mhz & 68882@40Mhz FPU[/color]
[color=000099]- 4MB Fast RAM, 2MB Chip RAM[/color]
[color=000099]- HD 3.2GB[/color]
[color=000099]- Compact Flash to IDE Adaptor[/color]
[color=000099]- OS 3.9 (BB1, BB2, Greek Locale)[/color]
Title: Re: SANA2 driver
Post by: fragment on October 31, 2005, 08:34:15 AM: Quote

Beowulf wrote:

The cnet device site said it is supported by the latest cnet device driver.

The cnet.device is a SANA-II driver, that is all you need. PPP is only for dial-up.
Title: Re: SANA2 driver
Post by: Beowulf on October 31, 2005, 08:51:36 AM: @technoid

Cheers Tech

:-D
Title: Re: SANA2 driver
Post by: Matt_H on October 31, 2005, 09:35:47 PM: @ mfilos

I believe the 3com device also needs pccard.library in LIBS:. It should be included in the archive.
Title: Re: SANA2 driver
Post by: ncafferkey on October 31, 2005, 10:04:35 PM: It's probably just a typo in your post, but the driver's name is 3c589.device. Also, make sure it's in your DEVS:Networks directory.