Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: mingle on October 27, 2005, 02:56:25 PM
-
Hi All,
I've just picked up an A2000HD (rev 6 MB, WB2.0) which has an A4091 HD/SCSI card in it, but it has no RAM fitting, only lots of empty sockets.
What I'd like to know is what type of memory chips do I need to put in and will these chips I already have fit the bill (labelled as follows):
"OKI Japan 989Z
M511000A-80R
90385507"
Cheers,
Mike.
-
An A4091 in a 2k?? :-o
Thought it's Z III only...
-
Yes, A4091 is Zorro3 only (and has no RAM slots). Probably meant 2091.
-
mingle wrote:
Hi All,
I've just picked up an A2000HD (rev 6 MB, WB2.0) which has an A4091 HD/SCSI card in it, but it has no RAM fitting, only lots of empty sockets.
What I'd like to know is what type of memory chips do I need to put in and will these chips I already have fit the bill (labelled as follows):
"OKI Japan 989Z
M511000A-80R
90385507"
Cheers,
Mike.
I didn't Google your chip numbers to see what exactly
they are....(if they were cheap, then they're probably
not the right chips ;-) )
But the A2091 takes 256x4 44256 Dip chips.
I did some searching for these chips awhile back and
found them to be quite expensive.
Not worth the price for me anyway.
You can find a ram card with several megs of ram install
for less than you would pay for the couple megs of chips
for the A2091 card.
-
Not to mention that the 2091/Ram expansion isn't the most reliable combination in my opinion:-).
-
2091? OK, the 4x256 (514256 and similar) can be found on many old ISA VGA cards to salvage from. ;-) You need sets of four to add 512 KB.
-
Vesalia has them and they are a bit pricey. OTOH, I have heard that they speed up HDD transfers.
-
Dear All,
Thanks for your suggestions and comments...
I know what I'm looking for now!
Cheers,
Mike.