Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: guest1255 on October 08, 2005, 03:50:21 PM

Title: A4000D Cybervision 3d/64
Post by: guest1255 on October 08, 2005, 03:50:21 PM

I have A4000D os 3.9 16 mb memory and trying to install the cybervision driver, everything goes ok, but can see in the screen mode any cv resolutions, am i doing something wrong? Or is it the aga chip doing the problem.
Can anyone help?

Title: Re: A4000D Cybervision 3d/64
Post by: FrankBrana on October 08, 2005, 04:08:08 PM

you have to enable modes in the cgxprefs.IIRC

Anyway, if I were you, i will give a try to the Picasso96 RTG system install program which its in the contribs drawer of the AOS3.9s CD.

Its free, have a layer of CGX compatibility, and works like a charm ( it feels faster, for me ).

Good luck

-FrankB

Title: Re: A4000D Cybervision 3d/64
Post by: AntonioX on October 08, 2005, 04:18:36 PM

Hi

Almost have the same setup as you, and i had the same problem if you are using cvx3? if you are then it will be best to get cvx4 as i got told there was a prob with version 3.

Title: Re: A4000D Cybervision 3d/64
Post by: patrik on October 08, 2005, 04:30:00 PM

@apache2k:

These (http://www.meanmachine.ch/~vgr/cgxv41_r71.lha) are the latest free CGX v3 drivers, give them a try. If you still have issues with them, try changing the "C:LoadWB" line at the end of your S:Startup-Sequence to "C:LoadWB SIMPLEGELS".


/Patrik

Title: Re: A4000D Cybervision 3d/64
Post by: guest1255 on October 08, 2005, 04:34:52 PM

Thank you folks, ill give a try and let you know..

Title: Re: A4000D Cybervision 3d/64
Post by: guest1255 on October 08, 2005, 05:12:15 PM

YES!! Picasso96 driver did the work...
Thanks again..