Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: padrino on September 22, 2005, 01:32:26 PM

Title: How to switch from Blizzard1260 to BlizzardPPC with RBM Towerhawk onboard ex II?
Post by: padrino on September 22, 2005, 01:32:26 PM

Hi,

using the "new" RBM-Tower (with onboard) for years, quite successful. Now I wanted to remove the Blizzard1260 and replace it by an BlizzardPPC(060).
The problem, all my Zorro-Cards are gone now (well, there are only CV3D and x-surf ;)).
I remember something about jumpers to set, but I don't have access to my manual (at my parents or lost).

So, I wonder, does anyone know if there are jumpers to be set, differently than for the B1260?

Help would be more than welcome. ;-)

CU,
Mario

Title: Re: How to switch from Blizzard1260 to BlizzardPPC with RBM Towerhawk onboard ex II?
Post by: doctorq on September 22, 2005, 02:25:02 PM

The manual can be found here. (http://www.amiga-hardware.com/showhardware.cgi?HARDID=1399) I'm sure it will reveal the solution for you :-)

Title: Re: How to switch from Blizzard1260 to BlizzardPPC with RBM Towerhawk onboard ex II?
Post by: padrino on September 26, 2005, 02:19:05 AM

Hi,

thanks, found the right jumper-setting. Case closed. ;-)

CU,
Mario