Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: _caddy_ on September 04, 2005, 06:37:23 PM
-
having dug out all the bits from my old a1200 after buying a new motherboard....i seem to be missing the internal floppy button, and that strange clip thing for holding it in.
anyone know where i can get these bits?
the drive is a chinon fz-354
yeh its a strange request.....
-
Howdy!
Really doubt that u can find that kind of spare part but you can always try to homebrew that parts, or go to a new/used one. Not very helpfull but god luck!
-
well i know that, so i was really wodering ether anyone has a broken 1200 floppy drive that i could skank the button off, and there are about a million towereised 1200's out there which no-longer need the clippy thing i describe,
ie if anyones willing to sell them to me i would buy them
Request for help.......
-
I had a dead 1200 drive when I was building my tower a few weeks ago, binned it though, what timing :-(
-
Dont bin ANY parts, its a CRIME! :angry:
-
I have a dead A3000 floppy drive (internal) and another external FD unit (dead too). I am not sure whether the A3000 FD will do for you but as far as the mechanics goes, it should be ok with your A1200 FD.
If interested, just drop me a line.
-
AMIGA-FAN wrote:
I have a dead A3000 floppy drive (internal) and another external FD unit (dead too). I am not sure whether the A3000 FD will do for you but as far as the mechanics goes, it should be ok with your A1200 FD.
If interested, just drop me a line.
The drives are all compatible with all amiga models (maybe except the AT 1200) BUT the A3000 has a very different eject button! These are very rare, I even paid 30 euro for a bunch of floppy drives just because one of them had a button like that!
-
That's what I suspected, but was not sure if the poster was effectively referring to just the eject button or something else connected to it.
Regards.
-
yeah i was.
literally just the plastic eject button, and that strange clippy thing
its just because every time i use df0: i have to keep the top of the amiga
i dont like doing this, esp as its on the floor (in bits) atm in front of my tvi wanted to be able to put it somewhere, all nice and neat and packaged
-
Hi
I do have a spare plastic eject button for the Chinon drive...when you mention the strange clip thing,do you mean the angled metal bracket which holds one side of the drive to the Amigas case?
(http://img377.imageshack.us/img377/4448/parts7ak.jpg)
-
yup, those are the bits...
http://groups.msn.com/_Secure/0QAAZAykSYDA9mUmrz4drFRAHJgIJEN8Y!JTBEhlDL6Q2bZfcynkt2*vexKvnnPLysuxGqljnaIctLZ26KfI!ZcxtYh1389ByzowZAwBwhRc/74_1_b.JPG
although the clip looks a little different, the functionality is the same, those are the bits i need.
so, how much do you want for them?
PM me
cheers!!!!
-
PM sent