Amiga.org
Amiga computer related discussion => Amiga Marketplace => Topic started by: guest3217 on August 06, 2005, 09:10:57 PM
-
Hello,
Looking for a good home for my (15+ y/o) ol' sweet and faithful Amiga system! :cry:
This is a list of items which will soon be for sale on ebay. I would much prefer this to be a package deal, ie. not for individual sale. Please drop me a private message if you're interested.
Thanks,
W.
P.S.
This is a link to the listing:(updated 08-07)
http://cgi.ebay.com/Amiga-3000w-Hardware-SoftwareXtras-CPU-needs-TLC_W0QQitemZ5227958024QQcategoryZ4598QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Hardware & Software Collections:rtfm:
* Unless otherwise mentioned, all install disks and manuals are the original company disks and publications.
*Some of the hardware and software have been tested as recently as of 8/3/2005 on an A-1200. Some software and hardware have not been used in over a year, but worked before being packed/sealed into very good storage facilities.
*One owner only. Most if not all of the hardware and software components following in this list were purchased new by me. Pictures of the following items are available.
EVERYTHING IS “SOLD AS IS” WITHOUT ANY EXPRESSED WARRANTY
1- Amiga 3000 25 Mhz. w/ math coprocessor (motherboard rev. 9.03)
a. This machine worked perfectly up until July of 2005. The power and hard drive lights turn on, but it doesn‘t boot Workbench. Display chips, and/or chip 8372B need to be replaced~ I’m not certain, and I am not that much of a technician.
b. Though the machine is clean/has been maintained with utmost care and most of its individual components work fine, I am selling it as a parts machine. If you can find the replacement parts (I haven’t looked,) it may well be easily fixed.
c. 2 Mb. chip ram
d. 16 Mb. zip fast ram
e. 50 Mb. SCSI Quantum hard drive (in working order –checked 8/2/05)
f. 1.3 Gb. SCSI CMS Enhancements hard drive (in working order –checked 8/2/05)
g. 1.7 Mb. Amiga High density disk drive (in working order –checked 8/2/05)
h. Recently replaced Amiga 135 W. power supply (in working order–checked 8/2/05)
i. A-3000 key board
j. Micro Speed trackball (in working order–checked 8/2/05)
k. All cables included
l. Workbench ver. 2.04 original install disks 1-5 with Kickstart (Software working fine as of last time checked – in storage since 2003)
m. Workbench ver. 2.1 installation disks 1-4 (backup disks) (in working order & installable –checked 8/2/05)
n. Original Amiga Os 3-ring binder manual (all 5 lbs. of it!)
o. A-3000 original manual
2- Retina Graphics Card w/ 2 Mbytes of Ram (Software and card working fine as of last time checked – in storage since 2003)
a. 5 Install Disks for Retina
i. Ver. 2.3, 2.4/ Retina 1.4 AGA
ii. VD Paint 2.7
iii. Various backup disks with other software revisions.
3- Sunshine CM-7 High resolution color VGA 14” monitor (in working order –checked 8/2/05)
a. Works great with A-3000 31.5 Khz. Display output
b. Manual included
c. Swivel mount base included
d. Syncs to Horiz. 31.5 + 35.5 Khz. / Vert. 50-87 Hz.
e. All cables included
4- Epson 300-C 600 DPI Color Scanner (in working order –checked 8/2/05)
a. One of the original color scanners built to be a workhorse
b. Original manual
c. All cables included
i. (Parallel cable with connectors is original ASDG cable)
d. 1 install disk, original ASDG (see Adpro software listing)
5- External SCSI Syquest drive w/ 44 mg cartridges (in working order–checked 8/2/05)
a. Club Mac external case w/ fan cooled power supply.
b. External SCSI unit # selector with 50 pin connector
c. All cables included (including db 25 to SCSI centronix 50 pin connector cable)
d. 7 cartridges w/ cases included (44 mg. each, preformatted in Fat file system for MS-DOS, but can be formatted for Amiga OS)
6- Computer Multiport Data Switch (in working order–checked 8/2/05)
a. Parallel port 2x unit switcher (DB 25)
b. 2 inputs/1common output (connect multiple parallel devices without cable changing)
c. 1 db 25 to db 25 shielded parallel cable 6 ft. (like new) included
7- Data Switch (in working order–checked 8/2/05)
a. VGA 15 pin 4x unit switcher (input A/B/C/D + common output)
b. 4 VGA male/male 6 ft. cables included
8- Professional Page 4.1 software (in working order & installable –checked 8/2/05)
a. Install disks 1-4, original
b. backup disk #4 (of PP disk # 4 w/out read error)
c. 1 upgrade 4.0 to 4.1
d. 4.1 Manual update/clip art collection brochure
2- Professional Draw 3.0 software (in working order & installable –checked 8/2/05)
a. Install disks 1-2
b. Original manual w/ addendum update
9- Art Department Professional 2.3 software (in working order & installable –checked 8/2/05)
a. Install disks 1-3 (disk # 3 is backup copy)
b. 1 patch disk
c. 1 Professional Conversion Pack (Tiff/Pict/ etc.) (disk is backup copy)
d. Epson 300-C 600 DPI Color Scanner Controller
e. Original 3 ring binder manual with addendums on Scanner, etc.
f. OCR Software (3 backup disks, condition ? / not checked recently)
10- MakeScape software ( in working order & installable–checked 8/2/05)
a. Fractal Landscape creator
b. 1 Install Disk (backup copy)
11- VistaPro3.0 software (working order & installable–checked 8/2/05)
a. Fractal Landscape creator compatible w/ USGS data files
b. 1 Install disk (backup copy)
12- DSS 8+ Software (no hardware/digitizer)
a. 1 Install disk ver. 2.03
b. 1 Digital Sounds Sample disk
c. Look new- (software working fine as of last time it was checked – in storage since 2003)
13- Scala MM 300 software with green dongle hardware (software and hardware working fine as of last time checked – in storage since 2003)
a. MM 200 install disks 1-8 (backup floppies)
b. MM 211 upgrade disk (backup floppy)
c. MM300 upgrade disks 1-3 (original)
d. Scala Echo install disk (original disk/without hardware interface)
e. Scala MM 300 manual addendum
14- DebWare Software Collection (original disks, condition ? / A few I used recently were alright, though I haven’t checked them all. )
a. WB 007 - Clip Art
b. WB 105 a & b disks - 2.0 Utils.
c. WB 49 a, b & c disks - Animation Sampler
d. WB 51 - Animation Movie
e. WB 57 - Euro Animations
f. WB 82 a & b disks - Movie Style Animations
g. WB 92 Animation Utilities & Animations
h. WB 50 Animation Demo
i. WB 119 a, b, c, d, & e disks – Adobe type 1 font sets for PPage 3.0+/ Page Stream 2.1+ (they work & look great with PPage4.1!)
j. DD 77 – Programming
k. WB 115 – Term Ver. 2.3
l. DD 84 – Proteus BBS
m. DD 71 a & b – D.I.C.E.
15- Amiga Vision Professional software (in working order & installable –checked 8/2/05)
a. Installation disks 1-5 (original)
16- Final Copy 2 software (working order & installable–checked 8/2/05)
a. 6 Installation disks (ver. 1.3 & 2.0) - original disks
17- Final Writer software (working order & installable–checked 8/2/05)
a. 9 installation disks (1995 release) – original disks
18- Final Data software (working order & installable–checked 8/2/05)
a. 1 original install disk
19- Cross Dos Plus software (working order & installable–checked 8/2/05)
a. Original ver. 5 disk and manual
b. Contains CrossPC (ATX emulator) & CrossDos (PC device drivers)
20- Weird Dreams software game (software working fine as of last time it was checked – in storage since 2003)
a. 1 self-booting original disk
21- Shadow of the Beast II software (software working fine as of last time it was checked – in storage since 2003)
a. 2 original disk set from Psygnosis
22- Image Master ver. 1.06 (in working order & installable –checked 8/2/05)
a. Firecracker/Ham-E etc. compatible
b. 6 Install (original) disks
c. Original manual
d. ADpro-like 24 bit image package
23- 3.5” Floppy Archival Cases
a. 2 hardbound book-style cases
b. 3-ring binder with vinyl floppy sleeves
24- 3.5” Floppy storage box
a. Hardened plastic case
b. Capacity for over 100 disks
c. Removable dividers w/ labels
25- Vinyl dust covers
a. CPU and monitor covers
:shocked:
-
Nice post, gl finding a buyer :-)