Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: Chain on June 09, 2005, 04:26:37 PM

Title: Cybervision64 problems
Post by: Chain on June 09, 2005, 04:26:37 PM

A3000T+CV64, orig. drivers and it looks crappy. Plz look someone on this
pic (http://chain.3dgrafika.cz/temp/cv64prob.jpg).

where i make a mistake? its a old driver, or CV is broken?

Title: Re: Cybervision64 problems
Post by: MrZammler on June 09, 2005, 04:29:28 PM

Try using the latest picasso drivers from here:

http://www.picasso96.cogito.de/

Title: Re: Cybervision64 problems
Post by: doctorq on June 09, 2005, 04:44:25 PM

Or try with CyberGraphX v4. Some time ago someone described how to make the CyberGraphX v3 installation up to date, but I can't remember who it was, or how it was done....

Title: Re: Cybervision64 problems
Post by: Brian on June 09, 2005, 05:27:40 PM

I doubt it's the drivers fault. I've seen that kind of behaviour before when there's bad memory on the gfx card. Doesn't say if you got 2 or 4MB on the CV64 but if you got 4Mb try removing the 4 socketed memory chips. Hopefully that'll help, if it does try get hold of some old S3 PCI gfx cards with socketed gfx memory to replace the bad ones you have.

BTW... what buster do you have? Had to upgrade to Buster11 to get a CV64 to work in a friends A3000.

Title: Re: Cybervision64 problems
Post by: Chain on June 09, 2005, 07:09:49 PM

WOOO! IT WORX with that cubistic driver! ThanX a lot guyz!