Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: HardStep on June 09, 2005, 03:31:48 AM

Title: Ext ToastScan Scandoubler/FF & Int ScanMagic Scandoubler/FF
Post by: HardStep on June 09, 2005, 03:31:48 AM
Hi,
found those two (Ext ToastScan Scandoubler/FF & Int ScanMagic Scandoubler/FF) available on www.softhut.com .
Which one would be better for A1200 or should i get anything else? Will scandoubler work with LCD panel?
Thanks.
Title: Re: Ext ToastScan Scandoubler/FF & Int ScanMagic Scandoubler/FF
Post by: shaf on June 09, 2005, 04:29:03 AM
Hello,

From what I have heard the Internal Scandoubler is better quality. External SDDs had Heat issues.

Using a ScanDoubler on a LCD Panel only work well if you are useing the LCD's recommended Resolution  and Refresh rate, otherwise the picture looks worse than trying to use an Amiga Monitor.

Supposedly if the LCD Panel supports a NTSC/PAL Signal then the natuve Amiga modes will look significantly better. I've never tested this scenario, Can't afford the Samsung LCD's that have this feature.

Cheers

Shaf

Title: Re: Ext ToastScan Scandoubler/FF & Int ScanMagic Scandoubler/FF
Post by: Amigaz on June 09, 2005, 06:02:14 AM
Quote

HardStep wrote:
Hi,
found those two (Ext ToastScan Scandoubler/FF & Int ScanMagic Scandoubler/FF) available on www.softhut.com .
Which one would be better for A1200 or should i get anything else? Will scandoubler work with LCD panel?
Thanks.


I regret to inform you that Softhut is out of stock and isn't going to fill it up either