Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: on November 05, 2002, 04:17:44 PM

Title: Error #80000000004 HELP!
Post by: on November 05, 2002, 04:17:44 PM
hello,

i cant use some of my tools on my amiga! for example multiview, ed and PC0, when i start them it says "Error #8000000004" and it wont start, but when i use ed from my WB 3.1 disk it works... might it be my HD? but WB installed without errors...

also, how do i use the PC0 from my WB disk, when it mounts, nothing happens in the way of CrossDOSSING... tnx

erik
Title: Re: Error #80000000004 HELP!
Post by: redrumloa on November 05, 2002, 04:39:53 PM
Quote
also, how do i use the PC0 from my WB disk, when it mounts, nothing happens in the way of CrossDOSSING... tnx


Did you put PC0 in your DEVS: drawer?
Title: red diagnostic screen
Post by: on November 05, 2002, 04:57:55 PM
no its in my strorage...

when i boot up i get the red diagnostic screen, what does thi mean
i have an miga 3000

erik
Title: Re: Error #80000000004 HELP!
Post by: Skippy on November 05, 2002, 05:04:09 PM
CrossDOS:
http://www.amigarealm.com/computing/workshop/programs/extras/csub5.htm

Guru:
http://www.amigarealm.com/resources/errorc1.htm

Have you change any libraries, datatypes etc

Check for virii

Le Skippue
Title: Re: red diagnostic screen
Post by: redrumloa on November 05, 2002, 05:08:01 PM
Quote

cobra wrote:
no its in my strorage...

when i boot up i get the red diagnostic screen, what does thi mean
i have an miga 3000

erik


 During this system test the Amiga is sending vital information to the
screen with colors. If the system checks out ok, you will see the following
sequence that you have seen so many times.
 
DARK GRAY:  The initial hardware tested OK. the 68000 is running
            and the registers are readable.
 
LIGHT GRAY: The software is coming in and seems OK.
 
WHITE:      The initialization test have passed.
 
 
   If something is wrong with your system, you may see the following:
 
RED:    Error was found in ROMS.
 
GREEN:  Error found in the CHIP RAM.
 
BLUE:   Error was found in the custom chips.
 
YELLOW: If 68000 found an error before the error trapping software (GURU)
        was running.
Title: Re: Error #80000000004 HELP!
Post by: Ancalimon on November 05, 2002, 05:33:42 PM
looks like ebola virus.
Get the floppy version of latest virus executor "not using your Amiga!"
and then boot with that disk and run the test on all your computer.
Ebola infects every file that is run.
Title: Re: Error #80000000004 HELP!
Post by: on November 05, 2002, 05:37:37 PM
well, a have a newly formatted and installed workbench, and this computer havent been connected to the net since the last format...
the screen is light red for a little while then the computer boots up good, but the programs wont run...
tnx

erik