Amiga.org

Amiga computer related discussion => Amiga Software Issues and Discussion => Topic started by: lorddef on December 18, 2004, 06:25:21 PM

Title: amissl v1.1
Post by: lorddef on December 18, 2004, 06:25:21 PM

I'm using ibrowse2.1 and trying to get it to work with amissl v1.1.

I've installed amissl using its installer script and checked
that the assign for amissl is in user-startup, checked I have the cypher libraries
and the amissl.library in libs but I still cant log in to ebay.

Is there something I have to set up in my genisis prefs? like
set https port 443 or something?

I just get the requester telling me to install amissl or miamissl.

Title: Re: amissl v1.1
Post by: blobrana on December 18, 2004, 07:27:21 PM

Hum,
and in ibrowse`s prefs - under `security` - you have ticked the three tabs miamissl sslv2 etc....?

perhaps it`s the ibrowse version (??) have you tried 2.3?

Title: Re: amissl v1.1
Post by: MickJT on December 19, 2004, 01:55:54 AM

IBrowse needs AmiSSL version 2

not 1.1

www.iospirit.de

Title: Re: amissl v1.1
Post by: lorddef on December 19, 2004, 04:25:12 PM

I thought only versions of ibrowse later than 2.2 needed amissl v2?

Can someone who has set this up point me in the right direction?

Title: Re: amissl v1.1
Post by: lorddef on December 19, 2004, 04:28:04 PM

I just unticked "use miamissl" and now I get DOS error, object not found

Title: Re: amissl v1.1
Post by: blobrana on December 19, 2004, 05:26:01 PM

Hum,
 i think you have to have them ticked on...

Are you using Yam , etc, (and that is why you need V1.1 rather than upgrading to amissl V2 ) ?

your startup sequence liiks like this?
;BEGIN AmiSSL
ASSIGN AmiSSL: "sys:Internet/AmiSSL"
if exists AmiSSL:Libs
ASSIGN ADD LIBS: AmiSSL:Libs
endif
;END AmiSSL


best to upgrade/download ibrowse and amisslv2 (http://www.ibrowse-dev.net/resources.php)

Title: Re: amissl v1.1
Post by: lorddef on December 19, 2004, 09:10:51 PM

upgraded to amissl v2.2 and ibrowse 2.3 (which now has an annoying 30 minute time limit and will only allow me one window) and I still cant access ssl pages.

Same error message telling me to use miamissl. So I'm guessing I need to set up amissl in Genesis or something?


in my user-startup I have

;BEGIN AmiSSL
assign AmiSSL: "Workbench3.9:Internet/AmiSSL"
if exists AmiSSL:Libs
   assign ADD LIBS: AmiSSL:Libs
endif
;END Amissl

Title: Re: amissl v1.1
Post by: lorddef on December 19, 2004, 09:36:41 PM

http://www.lorddef.net/pics/err.jpg

and now after I run IB2.3 my computer slows down like hell :-(

Title: Re: amissl v1.1
Post by: lurkist on December 19, 2004, 09:59:15 PM

You need to -

a. Move your IB keyfile from your old version to your new version ( you did make a backup, right? )
b. Make sure in IB prefs SSL v2 and v3 are checked and Miami SSL is UNchecked (you are using Genesis from WB3.9) No Genesis settings need to be changed.
c. In IB prefs Security, Ciphers, UNcheck 3DES.  This may be causing slowdown.

Title: Re: amissl v1.1
Post by: blobrana on December 19, 2004, 10:27:24 PM

Hum,
SS looks ok...

Check that you have the correct processor type of amissl libs:
68020-40

And ibrowses prefs uses picture processing as  `internal` - check the correct version(68020-40) of codecs are used...

And increase your cache etc...

Title: Re: amissl v1.1
Post by: lorddef on December 19, 2004, 10:39:59 PM

Okay sorted now, I unticked MiamiSSL and its all go.  Ibrowse is still a bit crashy though and slows everything down :(

Now if I can just find that keyfile...

I'd still use voyager anyday over ibrowse but it's too buggy and development seems to have stopped :(

Title: Re: amissl v1.1
Post by: lorddef on December 19, 2004, 10:40:34 PM

Oh yeah, and thanks for the help!