Amiga.org
The "Not Quite Amiga but still computer related category" => Amiga Emulation => Topic started by: ikir on February 18, 2003, 11:49:24 AM
-
How i can install a network card under Amithlon?
:-?
I have a RTL8029 PCI.
Thanks :-)
-
Ah! I want to use it with genesis from OS3.9 :-)
-
Use 10mb
not 100mb
bec amigaOS won't work on 100/10mb ethernet.
-
Just use the powerne2k.device (copy it from the amithlon_hd: partition if you don't already have it installed.
In Genesis, set it up the same way you'd set up any other Amiga NIC. Essentially, pick the device driver and off you go.
-
Amiga works with 100Mb with Mediator.
In all cases this pc has a 10Mb card.
Please help :-)
-
DazzaAmiga wrote:
Use 10mb
not 100mb
bec amigaOS won't work on 100/10mb ethernet.
Well, the RTL 8029 is a PCI 10 Mbit card (actually it's the cipset), and known to work fine with Amithlon.
AmigaOS itself will work just fine with 10/100 Mbit or even just 100 Mbit cards, provided you have the drivers. Currently the only 100 Mbit drivers available for Amithlon are those that work with the OpenPCI library, for RTL 8139 based PCI cards.
-
OK i try! Thx
-
AmigaOS itself will work just fine with 10/100 Mbit or even just 100 Mbit cards, provided you have the drivers. Currently the only 100 Mbit drivers available for Amithlon are those that work with the OpenPCI library, for RTL 8139 based PCI cards.
Cool, my new motherboard (Gigabyte GA-7VAXP) has onboard RTL8139(A) so hopefully It'll work :))
-
@ikir
Don't forget to copy "vmc.resource" from AmithlonHD:Libs
to sys:Libs.