Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: K7HTH on November 13, 2004, 04:34:30 PM
-
I have a KB in excellent condition won in an auction attached to a rev 6A board in an A500. Each time upon booting, the caps lock comes on and stay on. No keys respond to type text but I can reset with Cntrl Amiga Amiga keys. Does anyone know why this is?
-
I have experienced the same symptom on another mobo, this time on a ver. 5 board. So I persume the problem is localized in the KB and not the A500. Any comments?
-
Well, the symptom stopped on the ver 5 mobo. I put the KB back into the ver 6A and the symtom returned. Arrrrgh!
-
I too have a funky 500 keyboard that does just the opposite, the caps light won't come on and I have great difficulty getting the shift or caps keys to work with other keys. I figure it's probably corrosion or a bad keyboard controller. You might try just swapping out keyboards. Try also checking inside the plastic keyboard/motherboard connector; sometimes the wire contacts can get dislodged if plugged in/out many times.
-
Thanks, Argus I will have to try that out. I also find it I move the board around and wiggle the ground strap the light goes out and works well again, sometimes.
-
Taking note of the circuit board while taking closer note of the solder welds I noticed cold solder points around the IC. I resoldered the contacts ans also the lead wires from from the mobo cable. All works like dandy! Thanks for the sounding board, all.