Amiga.org

Amiga computer related discussion => Amiga Software Issues and Discussion => Topic started by: Twin on August 25, 2004, 02:19:24 PM

Title: Installing IDEFix
Post by: Twin on August 25, 2004, 02:19:24 PM

Im trying to get a 6GB Hard Drive to work in my A1200, I have worked out I need to install IDEFix and SFS (one of the available options). I have both, but IDEFix seems to be all about some CD file system, how do I just install what is required to use the big HD support in SFS (ie scsi-direct.device as I understand it).

Also is this the right process:

1. Install HD
2. Boot using workbench disks, use HDToolbox and partition a System partition (approx 500MB)
3. Install WB 3.0 from Disks
4. Install IDEFix
5. Install SFS
6. Setup rest of HD (ie 5.5GB partition)

Title: Re: Installing IDEFix
Post by: LP on August 25, 2004, 03:10:30 PM

I would do:

1. Install IDEFix (hardware)
2. Install HD
3. Boot using workbench disks
4. Install IDEFix (software)
5. Install WB 3.0 from Disks on new partioned HD
6. Install SFS
7. use HDToolbox and partition a System partition (approx 500MB)
8. Setup rest of HD (ie 5.5GB partition)

I've never used SFS so I'm guessing here..
But you don't need SFS to have idefix running

-EDIT-
You could switch the 4 and 5 above ;-)
IDEFix is both for CD drives and HD's or other amiga compatible IDE hardware..

Title: Re: Installing IDEFix
Post by: Framiga on August 25, 2004, 04:36:02 PM

Hi

DON'T use IdeFix97 with SFS 1.227 (on Aminet now). . .it is incompatible.

Use the previous 1.214.

Bye

Title: Re: Installing IDEFix
Post by: Twin on August 26, 2004, 02:15:00 AM

Thanks guys

I understand all that, but I want to know how exactly you install IDEFix software? If you use the install script that comes with it it just install the CD file system stuff. The docs have a small part about installing IDEFix for hard drives but just tells you to put something in your startup sequence, its not very helpful.

Title: Re: Installing IDEFix
Post by: blobrana on August 26, 2004, 02:30:33 AM

Hum,
yeah,
it should just install everything when you click on the installer...

You startup-sequence should look like this:

[color=660000]$VER: STARTUP-SEQUENCE 46.4 (4.4.2006)
;Startup-sequence for AmigaOS 5.1[/color]
C:CheckLMB
IF WARN
SYS:Prefs/4xEIDEPrefs
ENDIF
C:4xEIDE.driver QUIET
[color=660000]blah, blah , blah
rest of the start up here ; QUIET
[/color]

Hold down the left mouse button on start up/ or click the prefs program to set-up (automatic) the drives ...

Title: Re: Installing IDEFix
Post by: Twin on August 26, 2004, 02:40:18 AM

I see

So if that stuff is in my startup-sequence, I should be able to install SFS and partition the rest of my drive into one big 5.5GB partition?

Title: Re: Installing IDEFix
Post by: Rassilon on August 26, 2004, 07:29:08 AM

IDEFix is a suite of programs, the main two being IDefix and loadide. CacheCDFS is also included and as you guessed is a CDROM driver.

IDEFix and Loadide do roughly the same job. (IIRC loadide makes idefix resident!!)

all you need to have is something like C:idefix (if idefix is in your c dir) in your SS.

Depeding on your confiuration there are a number of arguements you can add to the end of the command.

I suggest you throughly read the idefix instructions as it is all explained there.

Lewis  

Title: Re: Installing IDEFix
Post by: Twin on August 26, 2004, 01:18:50 PM

I can't seem to find a copy of SFS 1.214 anywhere, are you sure 1.227 is incompatible with IDEFix?

***EDIT***

Don't worry I think Ive worked it out!

Title: Re: Installing IDEFix
Post by: Twin on August 30, 2004, 02:34:58 AM

OK, I think I have installed everything correctly.

I partitioned a 200MB FFS partition, installed IDEFix then installed SFS 1.84 into the RDB. Then I go to create another partition and HDToolbox recognizes the first 4GB in the slider bar then resets and shows the next 2GB (if that makes sense).

So it allows me to format another 4GB and 2GB partition which adds up to more than 6GB?