Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: jimdibb on August 10, 2004, 01:32:04 PM
-
Anyone still familiar with the StarboardII clock/NVRamdisk? I'm having trouble setting mine up (I just got it and an A1000 free).
I had the clock working for a while, and the system memory shows over 2MB so it seems to be at least partly functional. I can't get the stickydisk or jdisk functionality working though. I did the jdisk_install, and mount jd0:. The mount seems to succeed because if I do it again it says it's already mounted, but info doesn't list it and I can't dir jd0:. The stickydisk just doesn't seem to work at all, no luck getting an sd0: device.
Could the RAM: device be interfering? RAM: seems to work but I can't quite figure out how to make best use of it. Should I copy the workbench disk there during startup then
Assign sys: ram:
Assign c: ram:c
Assign s: ram:s
Etc...
I got similar to this from the startup-sequence.HD file.
Thanks a bunch for any help to get this working better.
Jim