Amiga.org
Amiga computer related discussion => Amiga Software Issues and Discussion => Topic started by: djwave on July 19, 2004, 09:11:53 PM
-
I have 2 hd, one scsi and other atapi, but the 2 hd have the same priority in bootmenu, how can change it??
I have a A1200 towered with BlizzardPPC 060 603e+ 200mhz 64mg. and BVisionppc.
two hd, one scsi and other atapi.
thx.
-
Tried HDToolbox?
Cheers,
JaX
-
As said already start HDToolbox, select partision drive, "activate" Advanced Options, select the partision that you want to change the priority on and on the middle buttom part of the screen you'll see "Boot Priority:" (partision has to be bootable or this is ghosted)... change the number there to change priority, the highest priority will run first.
But if the problem is that the computer boots of SCSI when you want the IDE to boot or other way around why not just unselect "bootable" from the partision and that should do it.
-
ok, thx, this now work jejejeje
very very thx.
and, another question:
when i installed the 3.9 OS, i tried to install powerup option. when boot,before enter in the OS i see one message appear, in the message i read this"
"the ppclibrary has been detected while you attemted to launch WarpOS. WarpOS can not work in paralel to the ppc.library"
what option is the more powerful, the ppc.library or the warpOS????
and other jejejje,
any can teachme, the significate of the bootmenu ppc options???
thx
-
WarpUp can emulate PowerUp so it's the better option. As you have a BPPC the ppc.library will be on the turbocards itself, so to get ridd of it use bppcfix.lha (http://devnull.owl.de/~frank/BPPCFix.lha) in you're startupsequence and powerpc.library should work.