|
|
| A1200 struggling with an AteoBus | ||
 |
||
| Previous Image | Next Image | ||
|
Description: My A1200 struggling to fit an AteoBus correctly inside it. A1200 - Cdrom/4gb HD, 250mb HD, Apollo 1240 16mb ram, Ateobus, Pixel 64, Wireless pcmcia card, Picture Stats: Views: 2137 Filesize: 165.66kB Height: 768 Width: 1024 Posted by: smiley1635 at June 13, 2006, 05:00:30 PM Image Linking Codes
|
||
| 0 Members and 1 Guest are viewing this picture. |
| motorollin Posts:8669 | July 05, 2007, 08:25:17 AM Not necessarily. Ateo also made a tower which was designed for the AteoBus. I'm sure it would work better in that case. Also the Mediator/D-Box combination works very well. -- moto |
| guru-666 Posts:587 
| July 05, 2007, 12:16:07 AM which is why 1200 towers are a bad idea..... point and "case" |
| motorollin Posts:8669 | January 04, 2007, 10:23:27 AM I had an AteoBus with a Pixel64 inside a Power Tower and had to secure it to the bottom of the case in the same way, with the VGA cable going through the back of the case. It worked ok for a while before the whole thing died :-( -- moto |
| smiley1635 Posts:152
| June 14, 2006, 04:00:16 PM .... |
| Lando Posts:1390
| June 14, 2006, 01:23:06 AM I seem to recognise the case it's the plastic Micronik Infinitiv tower :-) One thing I hated about my A1200T was all the bits hanging off the motherboard and plugged onto places where things were never meant to be plugged, cables everywhere, and it was so messy and held together with black electrical tape. |