SCSI2SD+microSD bundles in stock and ready to ship from USA

[klx300r]

Yes, absolutely. Your amiga cannot tell this isn't a 30 year old SCSI hard drive =] If your SCSI controller is bootable, you're good.

so if I plug this into the side of my Amiga 1000 and use kick1.3 I can autoboot directly into workbench and it'll pick up the extra memory and scsi controller in the attached side cars??

[klx300r]

WHUT?  You don't plug the SCSI2SD into the side of your A1000, you have to first have a SCSI controller that's compatible with your A1000, then you plug the SCSI2SD into that.  All it is is a modern replacement for a hard drive, not a miracle product.  

:roflmao:guilty as charged asking for miracles I suppose:biglaugh:

So I can get this as a replacement for my 20 lb original 20MB scsi hard drive then which is working great with my scsi controller and 2 ram expansion side cars right

[klx300r]

Yes, SCSI controller required, though

ah cool so just have to plug unit into my scsi controller, and I can boot up to WB 1.3.  (Of course I have to backup all the stuff on my old scsi back onto the SD card)

[klx300r]

Check the documentation for your SCSI controller.  Many (most) A1000 SCSI controllers aren't going to support 4GB disks.  You'd probably be fine to save yourself the $20 bucks and get the 256MB model, which is still going to be a big jump up from 20MB; unless you have one of the rare A1000 SCSI controllers that can support such large disks.  

hmm I'm pretty sure there'll be a way I can partition the drive to smaller units that WB1.3 can use.  Worse case I can boot into 3.1 but prefer 1.3 for my A1000.  I personally love the sound of the old 'real' drives but I'm gonna get me one of these silent thingies in case the old girl retires one of these years