Welcome, Guest. Please login or register.

Author Topic: Help With kickstart 3.1 rev 5 motherboard  (Read 1088 times)

Description: Need help

0 Members and 1 Guest are viewing this topic.

Offline StaffanTopic starter

  • Newbie
  • *
  • Join Date: Dec 2023
  • Posts: 9
  • Country: se
    • Show only replies by Staffan
Help With kickstart 3.1 rev 5 motherboard
« on: December 22, 2023, 03:11:11 PM »
Hi!
I recently bought a kickstart 3.1 chip. I also booght an eprom adapter since I have a rev 5 board. With the kickstart chip came the following instructions: "Before installing the rom chip, you have to solder a connection between pin 1 and pin 31 on the socket. Then bend up pin 31 of the ROM and connect it to pin 21. IMPORTANT PIN 31 MUST NOT BE CONNECTED TO THE SOCKET"

But I got the impression I didnt need to solder if I bought the EPROM adapter? So should I solder or not?  :-\
 

Offline F0LLETT

  • Amigakit / A-EON Support
  • Administrator
  • Hero Member
  • *****
  • Join Date: Aug 2007
  • Posts: 539
  • Country: gb
  • Thanked: 18 times
  • Gender: Male
    • Show only replies by F0LLETT
    • Ultimate Amiga
Re: Help With kickstart 3.1 rev 5 motherboard
« Reply #1 on: December 22, 2023, 04:15:11 PM »
Would help if we could see adapter.

As I know the ones I make need no altering. That was only needed if using a piggy back socket and altering it manually.
Quote from: Hungry Horace
Resolute and Industrious Grand ruler of the yellow people and the Ultimate Amiga Empire
Ultimate Amiga Network (Home of SONY PSP Amiga Emulator and AMOS Factory)

Quote from:  He who shall not be named
"Chris is that you!!!"
My all time favorite quote.
 

Offline StaffanTopic starter

  • Newbie
  • *
  • Join Date: Dec 2023
  • Posts: 9
  • Country: se
    • Show only replies by Staffan
Re: Help With kickstart 3.1 rev 5 motherboard
« Reply #2 on: December 22, 2023, 04:49:48 PM »
It looks like this
« Last Edit: December 22, 2023, 05:03:35 PM by F0LLETT »
 

Offline F0LLETT

  • Amigakit / A-EON Support
  • Administrator
  • Hero Member
  • *****
  • Join Date: Aug 2007
  • Posts: 539
  • Country: gb
  • Thanked: 18 times
  • Gender: Male
    • Show only replies by F0LLETT
    • Ultimate Amiga
Re: Help With kickstart 3.1 rev 5 motherboard
« Reply #3 on: December 22, 2023, 05:04:34 PM »
It looks like this

Hi,

Sorry had to remove image, you displayed your cloanto key.
It would be better to email the place you bought it from and ask them to clarify.

EDIT:- It looks same as ours, just plug and play.
« Last Edit: December 22, 2023, 05:13:22 PM by F0LLETT »
Quote from: Hungry Horace
Resolute and Industrious Grand ruler of the yellow people and the Ultimate Amiga Empire
Ultimate Amiga Network (Home of SONY PSP Amiga Emulator and AMOS Factory)

Quote from:  He who shall not be named
"Chris is that you!!!"
My all time favorite quote.
 

Offline StaffanTopic starter

  • Newbie
  • *
  • Join Date: Dec 2023
  • Posts: 9
  • Country: se
    • Show only replies by Staffan
Re: Help With kickstart 3.1 rev 5 motherboard
« Reply #4 on: December 22, 2023, 05:57:55 PM »
thank you for removing the pic, I didnt think about that. And thanks for the answer as well :)