Welcome, Guest. Please login or register.

Author Topic: MorphOS2.4 Efika install problems  (Read 15774 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline pyrre

Re: MorphOS2.4 Efika install problems
« on: October 23, 2009, 10:06:50 PM »
I had some problems myself installing morph OS...

I used the built in format tools.
Before you start the install tool but when in desktop...
Explore the menus, it is there somewhere...
Prep the HDD first. it should do the trick...
Amiga 1200 Tower Os 3.9
BPPC 603e+ 040-25/200, 256MBram, BVIsionPPC, Indivision AGA MK2.
Amiga 2000 (rev 4.0) Os 1.2/1.3
2088 bridgeboard, 2MB ram card, 2091 SCSI.
Amiga 500+ Os 2.1
Derringer 030, 32MBram, Buddha in sidecar, Indivision ECS.
Amiga CD32
Video decoder
 

Offline pyrre

Re: MorphOS2.4 Efika install problems
« Reply #1 on: October 23, 2009, 10:41:19 PM »
Quote from: save2600;527086
I can't get the Efika to boot into anything. Hangs after a while.

I just measured the voltage of its BIOS or backup battery... it was dead. Could this be my problem?


I am not sure of that. my battery is low on poser as well...
It resets the network mac address every time it is powered off...
But the computer powers on without any problems...

Try to find out if there is any way of prepping the HDD form open firmware...
It may need disk space for buffers....
Amiga 1200 Tower Os 3.9
BPPC 603e+ 040-25/200, 256MBram, BVIsionPPC, Indivision AGA MK2.
Amiga 2000 (rev 4.0) Os 1.2/1.3
2088 bridgeboard, 2MB ram card, 2091 SCSI.
Amiga 500+ Os 2.1
Derringer 030, 32MBram, Buddha in sidecar, Indivision ECS.
Amiga CD32
Video decoder