SAM440ep and update3 or 4

[redfox]

@dh1

Just to be clear, there is the original AmigaOS 4.1 CD supplied by Hyperion.  This was installed on some systems before AmigaOS 4.1 Update 1 became available.

AmigaOS 4.1 Update 1 is an ISO image that replaces the original AmigaOS 4.1 install.

AmigaOS 4.1 Update 1 must be installed before you can install Update 2.

Update 2, Update 3 and Update 4 are updates only, but must be installed in order.

Download AmigaOS 4.1 Update 1, unarchive and burn ISO image to CD-R.
Cold boot system from your new AmigaOS 4.1 Update 1 CD-R disk.
Quick format your OS4 partition and install AmigaOS 4.1 Update 1.
Remove CD-R disk.
Cold boot system.
Download AmigaOS 4.1 Update 2, unarchive file and install Update 2.
Cold boot system.
Download AmigaOS 4.1 Update 3, unarchive file and install Update 3.
Cold boot system.
Download AmigaOS 4.1 Update 4, unarchive file and install Update 4.
Cold boot system.

---
redfox

[redfox]

@dh1

Please note that under normal circumstances there should be only one monitor file defined in your Devs:Monitors drawer.  In my case it is called Radeon 7000 and the Tool types show BOARDNAME=Radeon 7000.

In your case there may two files, one for the M9 and one for Radeon 9200.

The boardname for M9 should probably be BOARDNAME=Radeon M9 to show proper colours.

---
redfox

[redfox]

The original SAM update1 OS4.1 disk is not the same as the downloadable version?

I will leave this one for the guys who have SAM systems.

My system is a MicroA1.  We have the original AmigaOne AmigaOS 4.1 CD from Hyperion plus the downloadable version which was called Update 1.  These two AmigaOne versions are very different.  The AmigaOne AmigaOS 4.1 Update 1 replaces the original AmigaOne AmigaOS 4.1 CD.

---
redfox

[redfox]

@dh1

I found something in a thread about freezes on Update 3.  Some had issues with the USB 2.0 driver that came with Update 3.  Some had issues with their network connection.

To disable the USB 2.0 driver, edit Kickstart/Kicklayout file and comment out the following line as shown by adding ";" infront.  In my Kicklayout file, it is the last line.  Not sure about SAM.

original ...
MODULE Kickstart/ehci.usbhcd

new ...
;MODULE Kickstart/ehci.usbhcd

---
redfox