Welcome, Guest. Please login or register.
Amiga Kit Amiga Store Iridium Banner AMIStore App Store A1200/A600 4xIDE Interface

AuthorTopic: SAM440ep and update3 or 4  (Read 2966 times)

0 Members and 1 Guest are viewing this topic.

Offline dh1

Re: SAM440ep and update3 or 4
« Reply #15 on: December 26, 2011, 09:19:43 PM »
exactly!
 

Offline eliyahu

Re: SAM440ep and update3 or 4
« Reply #16 on: December 26, 2011, 09:39:16 PM »
Quote from: dh1;672998
exactly!
this doesn't sound good; especially the issue with your M9. you need to contact acube directly for support. you should also post on the official support forums regarding anything that might have changed between update 2 and update 3 that could explain this on the software side.

posting here won't help much, unfortunately. try using the official support channels. :)

-- eliyahu
"How do you know I’m mad?" said Alice.
"You must be," said the Cat, "or you wouldn’t have come here."
 

Offline dh1

Re: SAM440ep and update3 or 4
« Reply #17 on: December 26, 2011, 09:50:10 PM »
I'm also glad the content of a DEVS directory. :)

 The problem is the monitor driver. That's for sure!
 

Offline redfox

Re: SAM440ep and update3 or 4
« Reply #18 on: December 26, 2011, 10:38:17 PM »
@dh1

Just to be clear, there is the original AmigaOS 4.1 CD supplied by Hyperion.  This was installed on some systems before AmigaOS 4.1 Update 1 became available.

AmigaOS 4.1 Update 1 is an ISO image that replaces the original AmigaOS 4.1 install.

AmigaOS 4.1 Update 1 must be installed before you can install Update 2.

Update 2, Update 3 and Update 4 are updates only, but must be installed in order.

Download AmigaOS 4.1 Update 1, unarchive and burn ISO image to CD-R.
Cold boot system from your new AmigaOS 4.1 Update 1 CD-R disk.
Quick format your OS4 partition and install AmigaOS 4.1 Update 1.
Remove CD-R disk.
Cold boot system.
Download AmigaOS 4.1 Update 2, unarchive file and install Update 2.
Cold boot system.
Download AmigaOS 4.1 Update 3, unarchive file and install Update 3.
Cold boot system.
Download AmigaOS 4.1 Update 4, unarchive file and install Update 4.
Cold boot system.

---
redfox
 

Offline dh1

Re: SAM440ep and update3 or 4
« Reply #19 on: December 26, 2011, 10:48:21 PM »
The original SAM update1 OS4.1 disk is not the same as the downloadable version?
 

Offline redfox

Re: SAM440ep and update3 or 4
« Reply #20 on: December 26, 2011, 10:54:48 PM »
@dh1

Please note that under normal circumstances there should be only one monitor file defined in your Devs:Monitors drawer.  In my case it is called Radeon 7000 and the Tool types show BOARDNAME=Radeon 7000.

In your case there may two files, one for the M9 and one for Radeon 9200.

The boardname for M9 should probably be BOARDNAME=Radeon M9 to show proper colours.

---
redfox
 

Offline redfox

Re: SAM440ep and update3 or 4
« Reply #21 on: December 26, 2011, 11:03:25 PM »
Quote
The original SAM update1 OS4.1 disk is not the same as the downloadable version?


I will leave this one for the guys who have SAM systems.

My system is a MicroA1.  We have the original AmigaOne AmigaOS 4.1 CD from Hyperion plus the downloadable version which was called Update 1.  These two AmigaOne versions are very different.  The AmigaOne AmigaOS 4.1 Update 1 replaces the original AmigaOne AmigaOS 4.1 CD.

---
redfox
« Last Edit: December 26, 2011, 11:06:14 PM by redfox »
 

Offline dh1

Re: SAM440ep and update3 or 4
« Reply #22 on: December 26, 2011, 11:10:00 PM »
The colors are wrong in the UBoot. Radeon M9 on mother!
« Last Edit: December 26, 2011, 11:15:34 PM by dh1 »
 

Offline redfox

Re: SAM440ep and update3 or 4
« Reply #23 on: December 26, 2011, 11:58:27 PM »
@dh1

I found something in a thread about freezes on Update 3.  Some had issues with the USB 2.0 driver that came with Update 3.  Some had issues with their network connection.

To disable the USB 2.0 driver, edit Kickstart/Kicklayout file and comment out the following line as shown by adding ";" infront.  In my Kicklayout file, it is the last line.  Not sure about SAM.

original ...
MODULE Kickstart/ehci.usbhcd

new ...
;MODULE Kickstart/ehci.usbhcd

---
redfox
 

Offline dh1

Re: SAM440ep and update3 or 4
« Reply #24 on: December 27, 2011, 02:28:27 AM »
I got the error!
 KICKSTART / rtg.library
 Update3 new rtg.library to crash the system.
 Update2 old rtg.library working fine!

I do not know what's wrong! Idea?
My Radeon 9200 SE not compatible with the Update3 and 4? Only compatible with Update1 and 2? :D

OMG!
 

Offline Jeff

  • VIP / Donor - Lifetime Member
  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 1380
  • Total likes: 0
Re: SAM440ep and update3 or 4
« Reply #25 on: December 27, 2011, 02:34:36 AM »
Perhaps you could borrow a Radeon 9250 from someone to try?
 

Offline dh1

Re: SAM440ep and update3 or 4
« Reply #26 on: December 27, 2011, 02:42:22 AM »
Quote from: Jeff;673038
Perhaps you could borrow a Radeon 9250 from someone to try?

Of course! I need someone, the only problem is that the only country (Hungary) I have SAM system! :) It will be difficult to find a PCI version ... and low profile :)
 

Offline Duce

  • Off to greener pastures
  • Hero Member
  • *****
  • Join Date: Jul 2009
  • Posts: 1699
  • Total likes: 0
    • http://amigabbs.blogspot.com/
Re: SAM440ep and update3 or 4
« Reply #27 on: December 27, 2011, 04:59:54 AM »
Contact ACube/Hyperion.
 

Offline dh1

Re: SAM440ep and update3 or 4
« Reply #28 on: December 27, 2011, 05:42:34 AM »
AmigaOS4 systems, the Radeon9200SE cards have 3D support?
 I have all minigl-opengl and WARP3D programs and gives an empty window. The machine is very slow! :(
 

Offline TiredOLife

Re: SAM440ep and update3 or 4
« Reply #29 on: December 27, 2011, 02:56:31 PM »
Bad colours could be due to your connector.
Are you using the dvi-vga converter?

If so, this might be a better bet.

http://amigakit.leamancomputing.com/catalog/product_info.php?cPath=37&products_id=966