|
|
| Fast A4000 PSU modification | ||
 |
||
| Previous Image | Next Image | ||
|
Description: Fast and dirty PSU modification. To increase an air stream I has decided to rearrange the fan closely to a back wall. For this purpose it was necessary to shift PSU card a little forwards. I have made some holes in the bottom and made a carving. Has then installed spacer from PC case, in addition having strengthened glue. Cut off and filed from other side. Then I have flattened a back lattice and cut in it a hole for the fan (unfortunately not ideally, it is possible to see rough edge at the bottom). Has screwed the fan and has installed a decorative lattice. Only this easy modification has lowered at once noise level and has lowered temperature CPU on 5-7 degrees. The next step - instal lattice in side wall PSU, for hot air stream passed through an accelerator was output at once outside. Picture Stats: Views: 1192 Filesize: 205.71kB Height: 768 Width: 1024 Posted by: easy_john at April 12, 2009, 10:43:01 PM Image Linking Codes
|
||
| 0 Members and 1 Guest are viewing this picture. |