Voodoo3 card install problem help needed!

[doctorq]

@Daniele

Copy the file Picasso96Settings### from the Picasso96 archive, found in the devs drawer, to the devs drawer on your SYS drive. Reboot, and try again. Copy the file with the refresh rates prefered, and rename it to Picasso96Settings (ie, remove the digits). I'd start with 31 or 38 if I were you.

The specific tooltype in the monitor driver should point to devs:Picasso96Settings.

-EDIT-

As mentioned in other posts; if the Voodoo card isn't recognised by PCIInfo, then you will never be able to get it up and running.

[doctorq]

@Daniele

We are trying to help you, but if the Voodoo isn't recognised by PCIInfo, your only option is to get the card to be recognised first.

Without it being recognised, you can do the installation of Picasso96 correct 100 times, and it still won't work.

[doctorq]

Of course you need to install the driver for the Voodoo, otherwise it won't work.

I guess you didn't do as AMIGAZ advised you to do earlier in this thread.

you must first install the Mediator files, then Picasso96

[doctorq]

What files do you have in libs:Picasso96 now?