I have to get some time to triple-check this, but I believe this is correct for all of the electrolytic capacitors on a 110v NTSC Amiga 1000 Power Supply:
C11 2200uF 16V
C12 2200uF 16V
C13 2200uF 16V
C15 100uF 25v
C17 100uF 25v
C19 100uF 25v
C50 470uF 220V
C09 4.7uF 50v
C10 1uF 50v
C16 470uF 35v
C18 330uF 35v
C49 10uF 85v
I finally got around re-capping my A1000. Here is the caps list for the 220v PAL Amiga 1000 power supply:
3x 2200uF 10v
470uF 35v
330uF 25v
3x 100uF 25v
10uF 35v
4,7uF 50v
1uF 50v
I did not replace the big mains cap C50 as I couldn't find close enough replacement. The original in my PSU was 180uF 400v or there abouts. I believe that cap is not in a stressed position and as the smaller caps measured very good after removal, I was happy to leave the big one there for now.