Welcome, Guest. Please login or register.
Amiga Kit Amiga Store Iridium Banner AMIStore App Store A1200/A600 4xIDE Interface

 



A1000 Tower
A1000 Tower
Previous Image | Next Image
Description: All I ever wanted was one...

Two are PAL models without daughterboard.
Other two NTSCs with daughterboard.

Lowest one, PAL version is completely junk, with broken power, broken mobo, broken disk drive and even heavily damaged case at the rear. Second from that is broken NTSC model, which I'll try to resurrect. It's daughterboard which has given up.. The other two are working fine.
Picture Stats:
Views: 910
Filesize: 486.16kB
Height: 768 Width: 1024
Posted by: arttu80 at March 18, 2012, 07:26:53 PM

0 Members and 1 Guest are viewing this picture.

Comments (4)

MinTerm
Posts:3
May 24, 2012, 07:13:11 PM
My NTSC A1000 (s/n XM1181076) has a 'made in Japan' comment on the underside sticker but no Commodore logo on the front, even though it was bought in Toronto.  It still has the same light beige it had originally, no signs of colour change.
 
I don't believe there was any real difference between US and Canadian versions AFAIK.
 
A1000s without Commodore logos look so much nicer imho.
paul1981
Posts:2136
March 29, 2012, 09:34:43 PM
The Amiga 4000 prototype...
arttu80
Posts:249
March 19, 2012, 01:23:36 PM
Well, as far as I know, Commodore sold early batch of these machines in Europe with NTSC rev.A motherboard to feed demand. These "gems" are found here, in Finland.
salax54
Posts:70
March 18, 2012, 10:08:35 PM
Never heard or seen an NTSC A1000 with a Commodore logo stamped up front! Could it be say, a Canadian version? Or maybe Asian?
All US machines i've seen/have so far are without one..
Nice collection nevertheless! :)


Powered by: SMF Gallery