Amiga.org
Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: David Wright on April 03, 2018, 02:43:30 PM
-
Yeah, moved the computer while it was attached to cable and speakers and I done broke something. Pushing down on it brings sound on the connector.
Are these available anywhere? The A500s look different. I did solder to the board from the top side but didn't improve. I do have a video connector on the end of board, looks the same, can I use that?
-
I remember when you could buy a bag of RCA connectors at Radio Shack. Alas! :( Probably still available on sites like eBay, Amazon, Mouser, etc. Should be an easy solder job to remove and replace. Good luck!
-
Yea, maybe you can "borrow" that video connector or use something like this?
https://www.ebay.com/itm/PCB-Mounting-Audio-Video-Female-Connector-Adapter-Yellow-5-Pcs/362276022373?epid=1138334836&hash=item5459556865:g:TVcAAOSwP8lasz8v
I would prefer to install new piece, so you don't have to solder and desolder multiple times and increase potential of damaging something. Good luck anyway!