5*PCI+2*Zorro (Full length) in Mediator4000?

[doctorq]

@Thomas

Ok, so you say that the PPC demo of Gears work?

Please post your ENVARC for Mediator, PowerPC and Warp3D and the versions of the Picasso96 libraries. And if possible, also your jumper settings for the Mediator bridge board.

As for WipeOut, can you run it in full screen, or are you limited to a window? I always get corrupted graphics on the first screens :-(

[Thomas]

PowerPC/alertfile = CON:0/20/400/200/WarpOS - System Message/AUTO/CLOSE/WAIT/INACTIVE
PowerPC/crashfile = CON:0/20/400/300/WarpOS - PowerPC Exception/AUTO/CLOSE/WAIT/INACTIVE
PowerPC/debug = 0
PowerPC/memprot = 0
PowerPC/earlyterm = 0
PowerPC/hidewarning = 0
PowerPC/terminator = 0
PowerPC/seginfo = 100
PowerPC/gfxaddr = $e0000000
PowerPC/force = 1
PowerPC/NoPatch = 1
Picasso96/AmigaVideo = 31kHz
Picasso96/BlackSwitching = No
Picasso96/DirectColorMask = No
Picasso96/DoNotSetMMU = No
Picasso96/ShowModes = Essential
Picasso96/PlanarOnlyDIPFDBUF = No
Picasso96/PlanesToFast = No
Picasso96/EnableBootVGA = No
Picasso96/DisableAmigaBlitter = No
Picasso96/Debug = No
Picasso96/Experimental = No
Mediator/Warp3D = Yes
Mediator/VoodooMem = 16
Mediator/VoodooInt = Yes
pci.library 8620 Bytes 6.2 (12 DEC 03)
powerpc.library 16.1beta1 (07.01.2001)
Picasso96API.library 24520 Bytes 2.300 (19.09.1999)
Picasso96/Virge.card 11936 Bytes 1.7 (10 SEP 02)
Picasso96/Voodoo.card 14684 Bytes 4.23 (17 NOV 03)
Picasso96/rtg.library 217988 Bytes 40.3992 (25.12.1999)
Picasso96/fastlayers.library 1460 Bytes 40.48 (16.03.1998)
Picasso96/emulation.library 39652 Bytes 40.389 (19.09.1999)
Picasso96/S3ViRGE.chip 17516 Bytes 6.430 (13.09.1999)
Picasso96/CVision3D.card 4980 Bytes 6.281 (19.09.1999)
Warp.library 21288 Bytes 5.1 (07.02.2001)
warpHW.library 1396 Bytes 1.0 (10.04.1998)
Warp3D.library 67648 Bytes 4.2 (13.07.2001)
Warp3DPPC.library 101020 Bytes 4.2 (03.09.2001)
Warp3D/GFXdrivers/W3D_Picasso96.library 39216 Bytes 4.2 (02.02.2002)
Warp3D/GFXdrivers/W3D_Picasso96_PPC.library 21036 Bytes 4.2 (02.02.2002)
Warp3D/HWdrivers/W3D_AvengerBE.library 295716 Bytes 4.2 (13.07.2001)
Warp3D/HWdrivers/W3D_AvengerBE_PPC.library 392596 Bytes 4.2 (13.07.2001)
Warp3D/HWdrivers/W3D_AvengerLE.library 282312 Bytes 4.2 (13.07.2001)
Warp3D/HWdrivers/W3D_AvengerLE_PPC.library 359436 Bytes 4.2 (13.07.2001)

Here you are

Bye,
Thomas

[doctorq]

Thanks, hopefully I will be able to get it running in my top PCI slot as well.

May I ask which Picasso96 archive you have used? I was told not to use the one included on the OS3.9 CD. And what about the Warp3D drivers? Taken from the MMCD?

[Acill]

I had my Voodoo 3 in all the slots at one time to test and it didnt
matter where it was located, It worked just fine. All demos ect worked
the same. That was in a Mediator 3000 system.

[Thomas]

May I ask which Picasso96 archive you have used? I was told not to use the one included on the OS3.9 CD. And what about the Warp3D drivers? Taken from the MMCD?

I don't remember. P96 probably is from the OS3.9 CD or from http://picasso96.cogito.de (which should be the same). W3D probably from the MMCD. Isn't there a global install script on the MMCD which installs everything ? At least I just followed the instructions on the MMCD. Note that there are many directories on the MMCD and each contains its own set of instructions. Read them all. Especially read the instructions in the Voodoo4+5 directory, even if you have "only" a Voodoo3. And use the MedConfig script where possible (it isn't on the MMCD but came with one of the update emails).

Bye,
Thomas

[doctorq]

Hmm, I guess it is just me then. I tend to avoid using the install scripts on the MMCD as it sometimes installs the wrong libraries, and MedConfig seems to always smash my whole config up so nothing at all is running as it should. That could be a problem with my ppc settings though. I will have to dig into it later.

Did any of you have a PCI soundcard installed? Or TV card?

[Brian]

I got both "installed" in the mediator on the motherboard that's on the floor in it's side without casing.