Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: ntsc / pal jumper on A600  (Read 1090 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline alexandrohipolitoTopic starter

  • Newbie
  • *
  • Join Date: Sep 2010
  • Posts: 23
    • Show only replies by alexandrohipolito
ntsc / pal jumper on A600
« on: September 09, 2010, 08:01:50 AM »
A600 has internal jumper like A500 to change NTSC/PAL?
Logged
 

Offline alexh

  • Hero Member
  • *****
  • Join Date: Apr 2005
  • Posts: 3644
    • Show only replies by alexh
    • http://thalion.atari.org
Re: ntsc / pal jumper on A600
« Reply #1 on: September 09, 2010, 09:58:29 AM »
Nope, just like the A500+ and other Amiga's which use the 8375 2Mbyte Agnus there is no hardware NTSC/PAL jumper.

You can use software though.
Logged
 

Offline Zac67

  • Hero Member
  • *****
  • Join Date: Nov 2004
  • Posts: 2890
    • Show only replies by Zac67
Re: ntsc / pal jumper on A600
« Reply #2 on: September 09, 2010, 10:06:38 PM »
If your Agnus supports it you can cut pin 41 to change the default from NTSC to PAL (short it to GND for the other way around). Not sure if the A500+/A600 type supports that tho...
Logged
 

Offline alexh

  • Hero Member
  • *****
  • Join Date: Apr 2005
  • Posts: 3644
    • Show only replies by alexh
    • http://thalion.atari.org
Re: ntsc / pal jumper on A600
« Reply #3 on: September 10, 2010, 12:36:43 PM »
They don't.
Logged
 
Pages: [1]   Go Up
« previous next »