Amiga.org

Operating System Specific Discussions => Linux PPC discussion => Topic started by: hooleydog on June 06, 2014, 10:14:49 PM

Title: BoingBag in Amithlon?????
Post by: hooleydog on June 06, 2014, 10:14:49 PM

Hi Guys I'm not sure where to put my question, so I'll do it here. I have Amiga Amithlon installed on my laptop. But when I've installed BoingBag 3 and 4 then reboot, the DVD rom is not seen in WB. What's going on, cos the drive is seen before I install thoses 2 files.

Mike..

Title: Re: BoingBag in Amithlon?????
Post by: Ancalimon on June 07, 2014, 01:37:44 PM

Are you sure it's fully compatible with Amithlon? Amithlon is for x86 but boingbags are for 68k.  Maybe try removing the scsi.device update.

Title: Re: BoingBag in Amithlon?????
Post by: hooleydog on June 07, 2014, 08:28:09 PM

Quote from: FaLLeNOnE;765878

Are you sure it's fully compatible with Amithlon? Amithlon is for x86 but boingbags are for 68k.  Maybe try removing the scsi.device update.

You could be right. Maybe they are not compatible Amithlon. But I found out that boingbags 1 ,2 should be installed in Amithlon, so I thought the same with the other 2. But I'll backup scsi.device first (It's a patched one for large hard-drives) then try again and copy the scsi.device, and see what happens..

Title: Re: BoingBag in Amithlon?????
Post by: Minuous on June 08, 2014, 12:57:09 AM

When the installer script asks what Amiga model you use, what are you telling it? If you say "Other Amiga", it shouldn't do an upgrade of scsi.device.