Welcome, Guest. Please login or register.

Author Topic: Amiga 4000 tower (Ateo) inc SCSI on uk ebay  (Read 1083 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline amigamadTopic starter

  • Hero Member
  • *****
  • Join Date: Mar 2002
  • Posts: 2159
Amiga 4000 tower (Ateo) inc SCSI on uk ebay
« on: October 17, 2003, 10:20:07 PM »
amiga A4000 tower, this is a Ateo tower conversion of a desktop Amiga 4000.
The tower is in excellent condition as can be seen from the photos and has the following hardware:
Ateo Mid height tower with 4 * 5 1/4" drive spaces and 5 * 3 1/2" drive (2 externally accessable).
4000 Rev B motherboard
A3640 CPU card (a standard unmodified card with a full 040 running at 25Mhz)
Buster V11 chip
3.0 Roms
16mb Fastram on board + standard 2mb Chip + Extended memory on SCSI card
Yamaha SCSI 6x4x6 CDRW drive
Yamaha SCSI 8 speed CD drive (is a CDRW drive that only works in read mode)
Standard Amiga high density floppy
GVP SCSI2 card + 8mb extended memory
400mb IDE harddrive
A4000 keyboard in excelllent condition (no broken keys)
Set of original Workbench 3.0 disks
Some software included with it including CoverCDs, Aminet 11 CD, DeluxePaintIV Full boxed edition (pristine) and TurboPrint V5.02.

The system is currently setup and working and has been tested with MakeCD writing CDs ok.  There are points to be aware of with the tower, the first is that the clock circuit is broken and does not work (battery has since been removed) and the simm sockets retaining clips are broken, so therefore the simms have been fixed in (it is not possible to add any extra memory anyway so theres no reason to Touch them). the link is here a4000 tower conversion
I once had an amigaone xe but sold it .

http://www.tamiyaclub.com