Welcome, Guest. Please login or register.
Amiga Kit Amiga Store Iridium Banner AMIStore App Store A1200/A600 4xIDE Interface

AuthorTopic: Software update for Indivision AGA  (Read 3719 times)

0 Members and 1 Guest are viewing this topic.

Offline kolla

Re: Software update for Indivision AGA
« Reply #15 on: January 06, 2009, 12:32:30 PM »
Quote

If only this sort of HW could be made for the A600.

Would be lovely yes. And a new CPU+RAM card ofcourse. With integrated USB controller. And ethernet, and...  :-D
B5D6A1D019D5D45BCC56F4782AC220D8B3E2A6CC
---
A3000/060CSPPC+CVPPC/128MB + 256MB BigRAM/Deneb USB
A4000/CS060/Mediator4000Di/Voodoo5/128MB
A1200/Blz1260/IndyAGA/192MB
A1200/Blz1260/64MB
A1200/Blz1230III/32MB
A1200/ACA1221
A600/V600v2/Subway USB
A600/Apollo630/32MB
A600/A6095
CD32/SX32/32MB/Plipbox
CD32/TF328
A500/V500v2
A500/MTec520
CDTV
MiSTer, MiST, FleaFPGAs and original Minimig
Peg1, SAM440 and Mac minis with MorphOS
 

Offline Lorraine

Re: Software update for Indivision AGA
« Reply #16 on: January 06, 2009, 02:24:18 PM »
The A600 is cool in its own right imo, but there is no market for it as the A1200 offers at lot more for just being slightly bigger size.
 

Offline easy_john

Re: Indivision AGA 4000
« Reply #17 on: January 22, 2009, 11:26:00 AM »
Does Iniv4000 fit AGA slot or over Alice Chip, like Indiv1200?

I plain to add 4000Di Mediator in near future, and it dosnt have AGA slot.

PS I already buy indiv1200 and very happy with it.

PPS but if Indiv.FF have internal connector for vga signal from b/c-vision and switch to quick change signal source - it vill be absolutely perfect.
I have b/c-vision and must use external switcher, its take lot place, many cords, etc..
PegasosII G4 1.0/1Gb/80Gb/Ati 9200/MorphOS/Debian
a4000/PPC 233mhz/68060 50mhz/128mb/cv ppc/toccata/x-surf/kickflash/indivision/AOS3.9-4.0
a1200/PPC 200mhz/68060 50mhz/256mb/bv ppc/delfina/wifi/indivision sd+ff/AOS 3.9-4.0
a600/68000 7mhz/8mb fast/wifi/AOS 3.0
 

Offline trixster

Re: Software update for Indivision AGA
« Reply #18 on: October 10, 2016, 08:11:50 PM »
Sorry to drag up a really old thread, but did you ever find a way to fix this issue? My newly acquired A4000 has an indivision AGA fitted and I'm seeing this exact same 'letterboxing' with PAL and NTSC.

Quote from: kolla;507635
Hello Jens

I've got a couple of questions regarding Indivision that I hope is OK to ask here :-)

* 800x600 mode? I tried using Super72, but it doesnt really work well, I dont know it if it's supposed to work well either though. Is there something like HighGfx that can provide a good 800x600 with Indivision?

* I would love to have the 640x512 PAL display to fill my TFT not only horisontally, but also vertically. The best I have managed so far is this weird letterbox-like mode with borders above and below.

I have put various screenshots and related pics on my webserver, it shows how PAL mode never reaches the top of my monitor display. It's a bit annoying when playing games, since the picture is not displayed in 4:3 as it was meant to be. I've tried to tweak H-sync and V-sync, but only managed to freak out the monitor to not show anything. :-)

http://amiga.nvg.org/moro/Indivision_AGA/

Other than these tiny problems, I really love it - thanks alot for a great product!
[SIGPIC][/SIGPIC]A1200 + 80Mhz B1260 + Indi AGA2 + Ide-fix Express | A500 | A3000 + 50Mhz A3660 + CV64 + Deneb + 486SLC + ZorRam
A4000/040 + 66Mhz  Cyberstorm Mk2 + Indi AGA + Voodoo 3 + Sonnet G3 + Deneb + Prisma | SNES | C64 | CPC6128 | MD | 3DO
Acorn A3020 | A3000 | A420/1 | Atom | Master Turbo | BBC B | Atari Falcon + 100Mhz CT60e | PS1 | PS2 | Saturn | Atari Jaguar
 

Offline goldfish

Re: Software update for Indivision AGA
« Reply #19 on: October 10, 2016, 08:18:51 PM »
Have we gone back in time 2009 ?
 

Offline goldfish

Re: Software update for Indivision AGA
« Reply #20 on: October 10, 2016, 08:21:36 PM »
Kolla Vampire is the A600 answer to hires screen output and with a hell of speed incress as well. Price is only down side if only this hardware could be made more affordable.
 

Offline trixster

Re: Software update for Indivision AGA
« Reply #21 on: October 10, 2016, 08:26:32 PM »
Quote from: goldfish;815096
Have we gone back in time 2009 ?

Like I said, dragging up an old thread but Kolla's issue is relevant to what I'm seeing with my A4000 and the thread left his quandary hanging. So I'm wondering if it was ever resolved. A long old look through the Amiga.org and eab doesn't show anything but I could well have missed it.

The Indi AGA config does not seem to give anyway to manipulate the output of PAL 640x512 and NTSC 640x480 resolutions like the AGA Mk2 config does.
« Last Edit: October 10, 2016, 08:28:45 PM by trixster »
[SIGPIC][/SIGPIC]A1200 + 80Mhz B1260 + Indi AGA2 + Ide-fix Express | A500 | A3000 + 50Mhz A3660 + CV64 + Deneb + 486SLC + ZorRam
A4000/040 + 66Mhz  Cyberstorm Mk2 + Indi AGA + Voodoo 3 + Sonnet G3 + Deneb + Prisma | SNES | C64 | CPC6128 | MD | 3DO
Acorn A3020 | A3000 | A420/1 | Atom | Master Turbo | BBC B | Atari Falcon + 100Mhz CT60e | PS1 | PS2 | Saturn | Atari Jaguar
 

Offline polyp2000

Re: Software update for Indivision AGA
« Reply #22 on: October 11, 2016, 07:45:37 AM »
Quote from: goldfish;815096
Have we gone back in time 2009 ?


Hah -
Every time this thread gets updated, for all of a few minutes I think
"wow about time there was a firmware update" but this is always short lived as i realize its just got bumped again.

Will the promised graffiti emulation ever surface or was this just another idle promise without any intention?

Offline Menthos

Re: Software update for Indivision AGA
« Reply #23 on: October 11, 2016, 08:39:41 AM »
Quote from: polyp2000;815104
Will the promised graffiti emulation ever surface or was this just another idle promise without any intention?


I'm also waiting for the Graffiti emulation... Still hoping but not beliving it will turn up.
 

Offline kolla

Re: Software update for Indivision AGA
« Reply #24 on: October 12, 2016, 10:49:56 PM »
Quote from: goldfish;815097
Kolla Vampire is the A600 answer to hires screen output and with a hell of speed incress as well. Price is only down side if only this hardware could be made more affordable.


Sure, this was something I wrote 7 years ago, back in 2009.
B5D6A1D019D5D45BCC56F4782AC220D8B3E2A6CC
---
A3000/060CSPPC+CVPPC/128MB + 256MB BigRAM/Deneb USB
A4000/CS060/Mediator4000Di/Voodoo5/128MB
A1200/Blz1260/IndyAGA/192MB
A1200/Blz1260/64MB
A1200/Blz1230III/32MB
A1200/ACA1221
A600/V600v2/Subway USB
A600/Apollo630/32MB
A600/A6095
CD32/SX32/32MB/Plipbox
CD32/TF328
A500/V500v2
A500/MTec520
CDTV
MiSTer, MiST, FleaFPGAs and original Minimig
Peg1, SAM440 and Mac minis with MorphOS
 

Offline gertsy

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: May 2006
  • Posts: 2307
  • Country: au
  • Total likes: 5
    • http://www.members.optusnet.com.au/~gbakker64/
Re: Software update for Indivision AGA
« Reply #25 on: October 12, 2016, 10:58:17 PM »
Quote from: trixster;815098
Like I said, dragging up an old thread but Kolla's issue is relevant to what I'm seeing with my A4000 and the thread left his quandary hanging. So I'm wondering if it was ever resolved. A long old look through the Amiga.org and eab doesn't show anything but I could well have missed it.

The Indi AGA config does not seem to give anyway to manipulate the output of PAL 640x512 and NTSC 640x480 resolutions like the AGA Mk2 config does.


I'm sure someone has an answer.....
 

Offline kolla

Re: Software update for Indivision AGA
« Reply #26 on: October 12, 2016, 11:21:17 PM »
Quote from: gertsy;815190
I'm sure someone has an answer.....


I never found a solution for this.
B5D6A1D019D5D45BCC56F4782AC220D8B3E2A6CC
---
A3000/060CSPPC+CVPPC/128MB + 256MB BigRAM/Deneb USB
A4000/CS060/Mediator4000Di/Voodoo5/128MB
A1200/Blz1260/IndyAGA/192MB
A1200/Blz1260/64MB
A1200/Blz1230III/32MB
A1200/ACA1221
A600/V600v2/Subway USB
A600/Apollo630/32MB
A600/A6095
CD32/SX32/32MB/Plipbox
CD32/TF328
A500/V500v2
A500/MTec520
CDTV
MiSTer, MiST, FleaFPGAs and original Minimig
Peg1, SAM440 and Mac minis with MorphOS
 

Offline RealHomer

Re: Software update for Indivision AGA
« Reply #27 on: October 12, 2016, 11:55:25 PM »
Quote from: Menthos;815106
I'm also waiting for the Graffiti emulation... Still hoping but not beliving it will turn up.


Wait, Graffiti actually worked?  Mine has just been sitting in a box.  I could never get it to work even after corresponding with Jens.  Output was the same whether plugged in or not.  I always thought it was a hoax.