Welcome, Guest. Please login or register.

Author Topic: Screenmode fails to start  (Read 2462 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline captainmoomooTopic starter

  • Jr. Member
  • **
  • Join Date: Sep 2003
  • Posts: 70
    • Show only replies by captainmoomoo
Screenmode fails to start
« on: August 20, 2016, 06:17:00 PM »
Hi all,

I used WinUAE to setup a CF with AmigaOS 3.9 for my Amiga 4000.

Screen mode works fine in WinUAE, but it fails to start in the real Amiga with the attached error.

Can anybody help me understand what might've gone wrong here, and what I can do to fix it?

Thanks
 

Offline SnkBitten

  • Full Member
  • ***
  • Join Date: Feb 2016
  • Posts: 113
  • Country: us
  • Gender: Male
  • Amithlon Fanatic
    • Show only replies by SnkBitten
    • http://amithlon.snkbitten.com
Re: Screenmode fails to start
« Reply #1 on: August 20, 2016, 07:49:49 PM »
What screenmode do you have configured?   I had to build my A4000 HD on my PC with WinUAE because I didn't have a monitor that worked with 15 kHz modes (or a working floppy drive).  I installed OS 3.9, set screenmode to DblNTSC and moved it over to the real A4000.  Booted just fine.

I added a CF reader later and just did the same thing.  I removed all monitors from Devs:Monitors and only installed DblNTSC.  If you have a proper monitor, try having only NTSC or PAL and make sure the screen mode is set in Prefs and try booting then.

Also..you didn't have a UAEgfx or other RTG mode set in WinUAE did you?

Offline kolla

Re: Screenmode fails to start
« Reply #2 on: August 20, 2016, 11:10:53 PM »
Did you use A4000/040 profile on WinUAE when you installed OS3.9? If you used whatever model profile with a 020, then perhaps 68040.library was not installed, and this is what you get, or perhaps you don't run Setpatch in Startup-Sequence, so 68040.library is not loaded.
B5D6A1D019D5D45BCC56F4782AC220D8B3E2A6CC
---
A3000/060CSPPC+CVPPC/128MB + 256MB BigRAM/Deneb USB
A4000/CS060/Mediator4000Di/Voodoo5/128MB
A1200/Blz1260/IndyAGA/192MB
A1200/Blz1260/64MB
A1200/Blz1230III/32MB
A1200/ACA1221
A600/V600v2/Subway USB
A600/Apollo630/32MB
A600/A6095
CD32/SX32/32MB/Plipbox
CD32/TF328
A500/V500v2
A500/MTec520
CDTV
MiSTer, MiST, FleaFPGAs and original Minimig
Peg1, SAM440 and Mac minis with MorphOS
 

Offline captainmoomooTopic starter

  • Jr. Member
  • **
  • Join Date: Sep 2003
  • Posts: 70
    • Show only replies by captainmoomoo
Re: Screenmode fails to start
« Reply #3 on: August 28, 2016, 09:28:51 PM »
Hi guys,

Thank you so much for the help.

Putting the CF back in the PC and then setting the screen mode from there to DblPal did the trick.

Thanks!
Piyush