Rogue

[denis2342]

Can you be more specific on the hardware and OS details.

My only real hardware where I can test it is an A1000 with 68010 and 2MB fastram and kick 40.63. Development is on FS-UAE.

[klx300r]

@ denis2342
A500, Rev3-512 chip 512 fast but ACA500+ accelerator adds 8MB fast and kick3.1 running OS3.1. I tried running it kick 1.3 and WB1.3 with the ACA500+ and same thing so must be an issue with the ACA500+?

[denis2342]

if it is from disk you could try it with another copy or maybe from another drive. also you could check what happens when you just start "rogue -s".

I just tested the exact same .adf on my real A1000 and it works fine.

[klx300r]

if it is from disk you could try it with another copy or maybe from another drive. also you could check what happens when you just start "rogue -s".

I just tested the exact same .adf on my real A1000 and it works fine.

Working fine from disk  On my 1200 & 4000 I run the game from a folder on my HD but that won't work with my 500?

[denis2342]

hmm, is your Amiga 500 with kickstart 1.3? I forgot to disable the hunk feature which is only available on 2.0 and later. So right now 2.0 is minimum.

[klx300r]

Its running OS3.2 same as my other AGA miggies

[denis2342]

tested with 46.143, no problems. even with only 512 chip and nothing else.

[denis2342]

the new rogue needs the .lz4 files as images, you know that right?

[klx300r]

just dumped everything in the ADF to a folder and it worked fine on my A1200 & A4000.

[denis2342]

one last thing: if you start manually you should put a "stack 10240" in front.

[klx300r]

problem solved and it was an ACA500+ profile configuration issue where I didn’t have the fast ram on board and AUX_CF slots configured properly.