Amiga 4000 takes eight minutes to boot (solved) sort of

[davideo]

I initially had problems getting my 4000D with a WarpEngine and a SCSI2SD and 3.2 to boot.

After a week of trying to get it to see the SCSI2SD it suddenly started to work.

No idea why it suddenly worked but at no time does it take 8 minutes to boot.

[davideo]

Have you tried it with autoboot turned off K, J and H removed.

You've also got Wait State turned on. This is normally off by default. Jumper D

I've read through the thread and can't see what size Sims you've got fitted

[davideo]

So with the auto boot switched off does it still take 8 minutes to show the Rom screen?

[davideo]

Have you tried another CPU board?

If you're in the UK I can lend you a 030 CPU board for testing

[davideo]

Apologies I missed that

[davideo]

On your photo you appear to have the SCSI cable inserted mid run of the cable.

Is anything fitted on each end of the cable currently?

[davideo]

If you've got a SCSI device on each end of the cable you need to remove the termination on the WarpEngine.

[davideo]

This is my 3rd attempt at replying to this lol

As far as I can see they should be the ones.

Have you got a copy of the manual?

[davideo]

It certainly is with my 4000D as well.

It's been it bits for a year and I'm now just putting it back together after sorting out a few things.

I've installed 3.2 but it seems very slow so I'm going to try it with 3.9 again.