Welcome, Guest. Please login or register.

Author Topic: Troubleshooting a 'dead' Cyberstorm MK2 060/50.  (Read 261 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline slaapliedjeTopic starter

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: Oct 2010
  • Posts: 843
  • Country: 00
  • Thanked: 1 times
    • Show only replies by slaapliedje
Troubleshooting a 'dead' Cyberstorm MK2 060/50.
« on: October 08, 2016, 04:01:18 AM »
I've  tried looking around for some hints, and mostly only found a test to see if it's a CPU that is dead, by hitting capslock about ten times, and if it stays on, that's the issue.  Mine stays off.  The Indivision AGA Mk1 screen shows up, then all I see is a very dark gray as if the video is trying to output, but it ends up just sitting there.

I know the system itself still works, since if I throw the A3640 with 040->060 adapter I got from stachu, it still works.  I wanted the cyberstorm mk2 for the 128mb of fast ram, that and for some reason I can't seem to get my mediator software / radeon to work with the 040 to 060 adapter.

Any suggestions would be most valuable.  I just barely got this accelerator from someone on eBay.  So getting a dead card really sucks, it came with the scsi module and everything.
A4000D: Mediator 4000Di; Voodoo 3, ZorRAM 128MB, 10/100mb Ethernet, Spider 2. Cyberstorm PPC 060/50 604e/420.
 

Offline hese7

Re: Troubleshooting a 'dead' Cyberstorm MK2 060/50.
« Reply #1 on: October 08, 2016, 05:35:10 AM »
Are the clock jumpers (J100, J104) of the motherboard in INT position? The oscillator is firmly in place on the accelerator?