Welcome, Guest. Please login or register.

Author Topic: SCSI to IDE adapter  (Read 2432 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline LurchTopic starter

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 1716
    • Show only replies by Lurch
SCSI to IDE adapter
« on: February 02, 2012, 08:20:58 AM »
Do you think this will work, not sure so decided to post here. Don't think the connectors are correct and where is the chip for doing all the work?

Feedback seems good, so will eventually try one. Will by going in my A590 with any luck. :-)


http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=110818815703&fromMakeTrack=true&ssPageName=VIP:watchlink:top:en
-=[LurcH]=-
A500 Plus Black 030@40MHz 128MB | A1200T 060@80MHz 320MB | Pegasos II G4@1GHz 1GB  | Amiga Future Sub
 

Offline nikos.rizos

  • Jr. Member
  • **
  • Join Date: Sep 2010
  • Posts: 52
    • Show only replies by nikos.rizos
Re: SCSI to IDE adapter
« Reply #1 on: February 02, 2012, 08:46:34 AM »
The adapter on the listing is for a U320 SCSI.

The A590 uses a 50 pin SCSI so it will not work without an additional adapter.

By the way this looks I seriously doubt that this will work. No IC on the adapters PCB. It's more like a pass through...
A500 Frühe Version,
A500
GVP HD+ AT286, 1084S, A500+
A1200 Blizzard 1230 MK IV, Indivision AGA MKII, IDEFix Express, Subway USB, Melody 1200 Pro
 

Offline LoadWB

  • Hero Member
  • *****
  • Join Date: Jul 2006
  • Posts: 2901
  • Country: 00
    • Show only replies by LoadWB
Re: SCSI to IDE adapter
« Reply #2 on: February 02, 2012, 09:30:52 AM »
How do people get away with this shyt?  Hook that thing up and you're likely to blow out your drive and/or controller.

No, mate... you're gonna spend quite a bit more than $20 for a real SCSI to IDE adapter.  I've bought a couple for around $80 each from different vendors.
 

Offline Tahoe

  • Hero Member
  • *****
  • Join Date: Nov 2004
  • Posts: 971
    • Show only replies by Tahoe
    • http://www.amiga4ever.nl
Re: SCSI to IDE adapter
« Reply #3 on: February 02, 2012, 09:32:33 AM »
Indeed, this is an adapter to turn a normal IDE drive into a hot swappable drive, but it most definatly does not turn the drive into SCSI. It WILL damage your hardware.
Greetings from Wilnis, The Netherlands
Now owning ALL Amiga models and most; if not all; flavours of them...My Amiga Museum
 

Offline DonutKing

  • Jr. Member
  • **
  • Join Date: Aug 2011
  • Posts: 61
    • Show only replies by DonutKing
Re: SCSI to IDE adapter
« Reply #4 on: February 02, 2012, 10:12:54 AM »
For a 50 pin SCSI - IDE adapter that should work in your Amiga look for a  Yamaha V769970.
 

Offline LurchTopic starter

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 1716
    • Show only replies by Lurch
Re: SCSI to IDE adapter
« Reply #5 on: February 02, 2012, 06:11:39 PM »
Yep, was looking at thinking that something wasn't quite right with it. Will avoid. Thanks guys.

@donutking will have a look for a Yamaha V769970.

Get tired of ebay these days :(
-=[LurcH]=-
A500 Plus Black 030@40MHz 128MB | A1200T 060@80MHz 320MB | Pegasos II G4@1GHz 1GB  | Amiga Future Sub
 

Offline mechy

Re: SCSI to IDE adapter
« Reply #6 on: February 02, 2012, 06:13:44 PM »
Quote from: Lurch;678732
Do you think this will work, not sure so decided to post here. Don't think the connectors are correct and where is the chip for doing all the work?

Feedback seems good, so will eventually try one. Will by going in my A590 with any luck. :-)


http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=110818815703&fromMakeTrack=true&ssPageName=VIP:watchlink:top:en

If you need a solid state solution(i.e. using a compact flash or other card) in your 590 i sell these scsi card readers. they will go right on the 50 pin header.

Here is a link i posted on EAB about how to use this in the A590:

http://eab.abime.net/showthread.php?t=62178&highlight=a590

and if you want to buy a card reader they can be found here:

http://a4000t.com/store/index.php?main_page=product_info&cPath=65_79&products_id=184
 

Offline LurchTopic starter

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 1716
    • Show only replies by Lurch
Re: SCSI to IDE adapter
« Reply #7 on: February 03, 2012, 07:17:27 AM »
Quote from: mechy;678793
If you need a solid state solution(i.e. using a compact flash or other card) in your 590 i sell these scsi card readers. they will go right on the 50 pin header.

Here is a link i posted on EAB about how to use this in the A590:

http://eab.abime.net/showthread.php?t=62178&highlight=a590

and if you want to buy a card reader they can be found here:

http://a4000t.com/store/index.php?main_page=product_info&cPath=65_79&products_id=184


Very tempted, might be a better option after reading your post on eab. Will have to check shipping and the exchange rate at the moment from US to NZ :)

But would be an easier more stable option :)
-=[LurcH]=-
A500 Plus Black 030@40MHz 128MB | A1200T 060@80MHz 320MB | Pegasos II G4@1GHz 1GB  | Amiga Future Sub