|
|
| Inside the A500 PSU connector | ||
 |
||
| Previous Image | Next Image | ||
|
Description: Bugger, it's moulded... I was hoping to add a +5v sense wire from the power connector back to the ATX PSU (For an A1200) that I’m wiring up, but unfortunately this doesn't seem to be easily possible. Picture Stats: Views: 1266 Filesize: 210.98kB Height: 768 Width: 1024 Posted by: Hodgkinson at December 27, 2007, 03:26:45 PM Image Linking Codes
|
||
| 0 Members and 1 Guest are viewing this picture. |
| Hodgkinson Posts:1080 | December 29, 2007, 12:34:38 PM That's how it’s wired at the moment, but the purpose of the +5v sense wire is to adjust the voltage output of the PSU to help counteract the voltage drop across the supply leads (In the same way as it was wired originally – To one of the motherboard +5v power pins in the connecter). With it wired back to +5v inside the PSU, the benefit of having a +5v sense wire available is nullified. Hodgkinson. |
| rkauer Posts:3263 | December 29, 2007, 03:50:12 AM Put the sensor inside the PSU! |