I have downloaded pfs3aio.lha, where abouts do I place the file or how do I use it?
Many thanks
This is a rather dated video of setting up a drive from scratch, more than what you are trying to do here;-
https://www.youtube.com/watch?v=ckL5xYQjqLoThe relevant part of changing the filesystem on a drive, is about 3 minutes 20 seconds into the video.
The thing is that the old version of PFs filesystem on the drive is rather buggy with the 3.14 scsi.device (you don't have to do that bit, just the filesystem on the one partition).
This makes any data on that partition unreadable and you have to format the drive (which is what you are trying to do).
The filesystem written to a hard drive partition is like an interpretation and "method list" of code for doing things like copying and deleting files and formatting disks. If it becomes corrupt or obsolete with a version of scsi.device, then it has to be replaced.
Remember the limits, the limit is about 100GB for that particular filesystem. I doubt you'll need to change anything else but that filesystem to be able to go on and format the partition.