ScummVM AGA v1.2.0

[Xanxi]

Thanks for the job Novacoder

I have tried the 060 AGA version. ScummVM launchs, i have added 2 games (Monkey 1 and Monkey 2) but when i start a game i got only a white screen (with scanlines through the indivision) and nothing happens.
I have latest AHI. I tried ScummVM with default settings or some settings about the sound without success.

Did i miss something?

[Xanxi]

Hiya,

What music device to you have selected under your AHI prefs?   Sounds like it's having a problem loading the games or maybe with the audio?  Try this demo -> Simon the Sorcerer 1 (DOS demo) which I know plays ok.


Also, did you read the ScummVM readme yet?

What OS are you running BTW?



You could give this a try to see if it helps but I don't think that's why you're having issues:

This application doesn't 'bang the hw', it's actually a proper multi-tasking friendly WB application and therefore uses WB screen modes which you might not have setup correctly. Can you display wb using the 'MultiScan' + 'VGA only' monitor drivers on your display? Move both of these from storage/monitors and stick them in devs/monitors, after a reboot go to your display settings and try MultiScan 640x480 in 256 colors (test first before saving your changes!). After you choose MultiScan as your monitor driver you'll probably notice that your WB isn't correctly centered on your display, this is because you need to go into your Overscan prefs and fine tune it (graphics/text), make sure your WB screen is fully displayed and then run ScummVM AGA again. This time ScummVM should also be centered and fully visible

Thanks for those tips NovaCoder.

My AHI setup (latest v6) is set so that Unit 0 is Paula 8 bits +++

I have installed Multiscan and VGAOnly and setup the overscan. I have to thank you about that as i have discovered some OSD menus on my monitor that is was not aware of and i have been able to greatly increase my overscan for my usual HighRes PAL mode with the Indivision.

However, it's still no good for SCUMMVM, for both Monkey and Simon Demon.
I also have a previous SCUMMVM AGA port from you with no sound and it is working with the Monkey games (but of course without sound).

Any more clue?
I'm running OS3.1 by the way.

Even if it does not work for me, i just want to tell you that i greatly appreciate your work about SCUMM VM.

[Xanxi]

That's strange.   Are both of you guys trying the 060 version?   If so try the 030 version to see if that doesn't any better.   I can't think why you would be getting a white screen, esp if an older version ran ok on your system.

For RTG performance issues, have you tried to disable the music and/or reducing the audio rate right down to say 11k (within the ScummVM UI and NOT via the AHI prefs), you also have to restart for the changes to take effect!

The 030 version freezes the same way on a white screen.

[Xanxi]

I've setup AHI to Paula 8 bits without ++ and still white screen, not working

[Xanxi]

No, i have a full 060 CPU with FPU.
No boing bags here, i'm 3.1.
No menu wth F5, i can only reset the computer.

[Xanxi]

Stranger and stranger....I'll have to do some more investigation.

Maybe it does need OS 3.9 after all but didn't you say an older beta version worked on your setup without sound?

Anyway, thanks for the testing

I'm going to try it with a SnoopDos report sent to a file to investigate more.
And yes the previous version without sound is working fine. The DOTT special version as well.