Welcome, Guest. Please login or register.
Amiga Kit Amiga Store Iridium Banner AMIStore App Store A1200/A600 4xIDE Interface


CSPPC on A3000D
CSPPC on A3000D
Previous Image | Next Image
Description: This is how a CSPCC looks on my shiny 3000D.

The 680x0 is 060@50 one, cooled by a thermoregulated fan, and the ppc chip is a 233, cooled by a very same cooler but no thermo regulation at all ( always at full speed, just to be sure )

There is another little +12v fan underneath of back of the diskdrive, insuflating air to the 4 simms in the board, and its thermoregulated by the ambient temp in the case.

BTW very commom config, CSPPC, Picasso4, tocatta, ariadne2, DKB 3128...


Picture Stats:
Views: 2607
Filesize: 204.19kB
Height: 768 Width: 1024
Posted by: FrankBrana at October 05, 2005, 10:05:44 PM

0 Members and 1 Guest are viewing this picture.

Comments (5)

January 01, 2007, 03:05:21 AM
Dremmel is one of my best friends around :)
December 28, 2006, 02:38:31 AM
Hey, how did you cut that metal over the fans ?
October 28, 2005, 09:09:15 PM

No, there arent any special requirements in order to get the csppc running on the 3k. My 3k is SuperBuster rev11, ramsey 4 and dmac 2, so the only problem could come up with DMA zorro boards, but I have none of these.

My 3k just run fine :-D
October 24, 2005, 08:52:11 PM

Except for the INT2 hack (I presume), do you need any special custom chip rev. for the CSPPC to work in your A3000?
October 14, 2005, 08:52:17 PM
Very nice!  And, not so common (in an A3000 desktop at least).

Powered by: SMF Gallery