Welcome, Guest. Please login or register.
Amiga Kit Amiga Store Iridium Banner AMIStore App Store A1200/A600 4xIDE Interface


A3000T blank Hard drive plates
A3000T blank Hard drive plates
Previous Image | Next Image
Picture Stats:
Views: 1531
Filesize: 145.14kB
Height: 768 Width: 1024
Posted by: tonyvdb at December 21, 2006, 05:23:43 AM

0 Members and 1 Guest are viewing this picture.

Comments (6)

December 23, 2006, 01:20:21 PM
Thanks Tony!
December 23, 2006, 03:32:43 AM
Ok, here it is in mm:

150mm wide
42mm high
6mm plate depth
18mm tab from front to back
12mm tab sticks out on back
December 22, 2006, 01:08:27 AM
Tony, can we have that in mm please (to be accurate and sure).

The A4000T plate measurements:

Plate thickness: 6mm
Plate width: 42mm
Plate length: 148mm
Tab length: 9mm (from the face)
The tab therefore protrudes 3mm from the back of the plate
December 22, 2006, 12:23:32 AM
Well the plates are 3/4 of an inch deep from the front of the face to the end of the clip.
They are just over 5&3/4" wide and just under 1&3/4" high.
The A4000 blank did screw in but not the A3000T.
December 21, 2006, 10:14:09 PM
Yeah, those do look more like 4000T plates than I remember. I always thought the 3000T's were mounted via screws... Guess not. :-)
December 21, 2006, 11:35:42 AM
Hmmm maybe those can also be used on an A4000T. We need to measure the tab heights and plate dimensions.

Powered by: SMF Gallery