Welcome, Guest. Please login or register.

Recent Posts

Pages: [1] 2 3 ... 10
1
A600 GS / Re: A600GS Updates
« Last post by amigakit on May 02, 2024, 08:16:54 PM »
Thanks!  Here is a sneak preview of AmiBench with its new Dock, Calendar and Clock.

2
A600 GS / Re: A600GS Updates
« Last post by kolla on May 02, 2024, 07:27:21 PM »
It wasn’t sarcasm - are you suggesting that the next fluff you’ll show off isn’t a weather app?
What then? On screen post-it notes?
3
A600 GS / Re: A600GS Updates
« Last post by F0LLETT on May 02, 2024, 12:09:17 PM »
Clock and Calendar. Next up - the Weather applet.

 ;D, sarcastic as usual, got to love Kolla.
Is there anything you do not moan or have an issue with?
4
Amiga Marketplace / For sale motherboard A4000D rev2
« Last post by Cosmos on May 02, 2024, 10:28:17 AM »
For sale this NOT tested motherboard A4000D rev2 : for spares and repair, no return

Ideal for getting precious components, most of them are working I guess : so, you can build a new mobo using a new PCB from Acill

She have new capacitors, PIO2, battery on socket with his diode, Ricoh on socket, chipram Simm, SuperBuster -11 and DiagRom version 1.1

400 € + shipping in gift Paypal or bank transfer

Shipping insured 375 € via Mondial Relay :
- for France : 20 €
- for Europe : 25 €
5
Quote
I'd suggest replacing the entire PLCC socket unless you're very confident it's perfect.  IC sockets are notorious for causing all sorts of horrible intermittent problems.

Yeah probably not a bad Idea. I'll order one for when I have some free time to work on the amiga next.

Quote
Depends what you want to do long term.  There are plenty of interesting options in terms of the PiStorm and Vampire expansions.
In the end the machine is likely going to be used for running some demos for 80% of the time and the rest for games. So the more capable it is the better :P
7
Sounds interesting, but the link is broken.
8
In March 2022 I made a dash from London, to Worcester in the British midlands, to collect, or maybe even "rescue" an Amiga 4000.
I last owned an A4000 for a brief few months in the early 1990s, so getting an Amiga 4000 was something of a grail machine for me.
The machine was just a small part of a bundle of items, that had been used in the 90s at a commercial TV station in that area.
I was told the A4000 did not work, just a black screen...
Was the usual battery damage that so many 4000s fall foul of at play here?

Watch on and enjoy the journey of the Amiga 4000 rescue!

Amiga 4000 CH01: The Rescue & The Hoard
9
Well, I noticed today that when the machine was left on for a while during testing, say 20 minutes plus, the screen would brighten.
In fact, on a couple of occasions, it actually got back to normal brightness, or very close, actually usable.

So I measured the 3 variables, that could alter the brightness on the DAC and of the 3 it was the FS ADJUST, pin 42 which varied.
According to your sheet, this should be approx 1.236 volts but it was starting for me at 75mV and over time would rise to 250mV.

So I THINK the resistor which drives this may have issues.
To test this, I used a heat gun to warm it whilst on, and it visibly brightened as I warmed it.

So I ordered a direct replacement for it, at 562ohm, though I had to get a 2mm long one, as 3mm ones seem to be very-rare these days.
To go along with it, I also ordered a large 1k potentiometer, and a couple of surface mount ones as options.

If the 562ohm replacement does not work, is a little too dim still say, I may try the potentiometer instead and adjust it to see if there is a different sweet spot.

I also ordered some 100nF and 10nF ceramic capacitors, just in case the COMP capacitors have issues as well, though I don't think they do.
This should all be here Friday, so hopefully I can test this all on Friday/Weekend.
10
A600 GS / Re: A600GS Updates
« Last post by kolla on May 01, 2024, 09:56:43 PM »
Clock and Calendar. Next up - the Weather applet.
Pages: [1] 2 3 ... 10