|
A4000D MiniATX PSU replacement (1/2) | ||
Previous Image | Next Image | ||
Description: This is the Startech MiniATX PSU I use in my 4000D along with an ATX adapter. Works very well, gives much needed air-flow, and provides a little extra room for long SCSI CD-ROMs. Also viewable in the picture: X-Surf 3cc, IBM 18GB UW-SCSI drive (upside-down to accommodate cabling,) CyberStorm MKIII with 486 fan, and Plextor 12x CD-ROM. Picture Stats: Views: 1590 Filesize: 289.84kB Height: 768 Width: 1024 Posted by: LoadWB at September 13, 2008, 07:13:27 PM Image Linking Codes
|
||
0 Members and 1 Guest are viewing this picture. |
LoadWB Posts:2901 | February 23, 2009, 06:16:33 AM It's true. Without the power supply you're missing a screw hole for one of only two screws for the cover. None the less, mine still seems fairly rigid, and since I don't move it around, it's fine as it is. |
cv643d Posts:1197 | September 14, 2008, 03:41:16 PM Been thinking of doing the same to my A4000. But no matter how you look at it the stock A4000 PSU is actually quite reliable and a structural part of the case. I am going to cut my PSU open in the back and glue a mesh on, I have already replaced the fan with a hi-end quiet fan and it made quite an improvement. |