Hi All,
I have Ian Stedman's Classic Big Box ATX Adaptor (BBA).
From looking at his PSU guide for the A2000 it looks like he is showing Amiga mainboard power connector pin #1 as "not connected" (NC) to the +5v on the BBA with Amiga pin #12 "+5 User" being connected to one of the 4 BBA +5v terminals instead?
http://www.ianstedman.co.uk/Amiga/amiga_hacks/Amiga_PSU/amiga_psu.htmlThe way I have done it is:
Amiga Pin | BBA ( screw terminal # )
1 | NC
2 | +5v ( 5 )
3 | +5v ( 6 )
4 | +5v ( 7 )
5 | GND ( 2 )
6 | GND ( 3 )
7 | GND ( 4 )
8 | GND ( 12 )
9 | +12v ( 1 )
10 | NC
11 | -12v ( 11 )
12 | +5v ( 8 )
13 | -5v ( 10 )
14 | TICK ( 9 )
That has a all 12 of the BBA screw terminals connected to a single pin on the amiga PSU connector?
So the question really is does Amiga mainboard power connector pin #1 need to be connected to 5v?
Thanks.
Richard