Welcome, Guest. Please login or register.
Amiga Kit Amiga Store Iridium Banner AMIStore App Store A1200/A600 4xIDE Interface

 



A3000D INT2 Modification
A3000D INT2 Modification
Previous Image | Next Image
Description: Bottom of photo shows wire connection from pin 82 of the CPU slot to pin 21 of U350 at the top of the photo.

I can't solder for toffee so I put a dab of Titanium Epoxy on each solder point to connect the wire.

I have to wait 2hrs for the epoxy to harden now before I can test whether it has worked or not.
Picture Stats:
Views: 395
Filesize: 412.66kB
Height: 768 Width: 1024
Posted by: nicholas at February 18, 2011, 09:37:19 PM

0 Members and 1 Guest are viewing this picture.

Comments (2)

nicholas
Posts:8825
February 20, 2011, 09:32:27 PM
Nope. :(

Nor did it work when I connected pin 82 of the cpu slot to pin 19 of CN600.

Gonna have to check it with multimeter and then get the old soldering iron out methinks!
Karlos
Posts:16807
February 19, 2011, 10:07:35 AM
Did it work?


Powered by: SMF Gallery