Epsilon's Amiga X1000 Blog

[Epsilon_]

You could try PCIScan (shell command) to check if it is seen by MorphOS. If it is then it is probably problem in openpci.library...

Thanks - I ran the pciscan command as suggested. It looks like it only sees a pci-e to pci bridge - doesn't appear to see the pci-e audio card itself...

Not sure what else I can do to get the sound working.

Catcha,
Epsilon

[Epsilon_]

Hi All,

I now have dual boot working on the Sam 460CR with MorphOS 3.8 and AmigaOS 4.1 final Edition. More details on my blog here:

http://amigax1000.blogspot.com.au/2015/05/dual-boot-amigaos-41-fe-and-morphos-38.html

I hope this is interesting - I was so glad to get it working!

Catcha,
Epsilon

[Epsilon_]

there are some oddities. for example i have problems with partitions created under MOS in AOS4, but the reverse isn't true. so i always create SFS0 partitions to share between the two systems under AOS4 on my peg2. i have no idea why this is the case.

-- eliyahu

Very good tip and thanks for this - I confirm it works this way too. Prepping partitions under AmigaOS4 first is definitely the way to go.

@all

I have updated my blog with a new entry showing the external floppy connector (with power integrated) to use the Gotek on my CDTV. Link is here:

http://amigax1000.blogspot.com.au/2015/05/gotek-using-external-floppy-cable-on.html

I hope you enjoy it.

Catcha,
Epsilon

[Epsilon_]

Hi All,

Today I have a show report from the Adelaide Amiga 30 Meeting hosted by the Adelaide Amiga User Group.

It was a great night, with lots of people and lots of Amigas on display.

Plenty of pictures and info here:

http://amigax1000.blogspot.com.au/2015/05/adelaide-amiga-30-meeting-report.html

I hope you enjoy it! :-)

Catcha,
Epsilon

[Epsilon_]

Hi All,

Today I have an exclusive sneak preview on my blog of the upcoming MultiviewerNG program for AmigaOS4.1 by Andy "Broadblues" Broad for A-EON Technology. It will be released soon on AMIStore.

I tried it out on my Sam 460CR running AmigaOS 4.1 Final Edition.

Link to the post is here:

http://amigax1000.blogspot.com.au/2015/06/multiviewerng-sneak-preview-for.html

I hope you enjoy it!

Catcha,
Epsilon

[Epsilon_]

Hi All,

Been a bit busy with work this month, but today I have two new blog posts.

One looks at using a Radeon 7750 card with the Warp3D Southern Island drivers on my Sam460CR under AmigaOS4.1 Final Edition:

http://amigax1000.blogspot.com.au/2015/06/warp3d-working-on-my-sam460cr.html

The other is a quick blog post about reaching the 3 year milestone of the Amiga X1000 Blog! Thanks to all for reading and following me for the past 3 years!

http://amigax1000.blogspot.com.au/2015/06/3-years-of-this-blog.html

Catcha,
Epsilon

[Epsilon_]

Hi All,

I have written a new blog entry looking at the recently released games - Quake 2 high Definition Warp3D by HunoPPC, The Secret of Middle City (Demo) by GDG Entertainment and a quick look at the Warp3D version of Wings Battlefield. (All using AmigaOS4.1 Final Edition on my Sam460CR)

Link is here:

http://amigax1000.blogspot.com.au/2015/07/amigaos41-games-released-and-holiday.html

I will be on holiday for a bit from this week with no access to my Amiga systems so the blog will be paused until I return in August. In the meantime have a great time with your Amiga systems, Classic or Next Generation! :-)

Catcha,
Epsilon

[Epsilon_]

NIce blog update.
Hope your holiday has gone well. Any word on your X1000 yet?

Thank you, I had a great holiday in Japan. It was good to unplug - I really needed it.

I have been very busy back at work and also updating my interesting trains blog this week with my Japan trip train travels - please feel free to check it out if interested! http://interestingtrains.blogspot.com.au

When done with those blog entries (they take a lot of time) I will turn my attention back to the Amiga blog again. I am really looking forward to attending the Adelaide Amiga meeting next month!

Regarding my X1000, the CPU was confirmed damaged by Varisys just over a month ago. Most likely it was damaged by the unexpected power cut during the failed firmware update which I covered in my blog. It is an unlucky and sad situation for me.

My X1000 is now over 3 years old and is out of warranty unfortunately, and putting a replacement CPU in it is close to the cost of a new X1000, so I have been recommended to buy a new replacement X1000 instead, which gives me a new warranty again also.  

I am working on this replacement with A-EON at the moment, and Trevor is being very helpful and generous to get this sorted out for me. I am very grateful for this, and I have paid for the replacement this week.

Hopefully I will get this system shipped to me in AU soon, and have my X1000 again to blog about the latest developments! Can't wait to get it! :-)

Regards,
Epsilon

[Epsilon_]

Hi All,

I noticed that Entwickler-X has today released a new game for AmigaOS 4.1 called Bubble Shooter Deluxe. I have taken a quick look at it on my blog here:

http://amigax1000.blogspot.com.au/2015/08/bubble-shooter-dx-on-amigaos4-using.html

I hope you enjoy it!

Catcha,
Epsilon

[Epsilon_]

Hi All,

I have updated my blog with two posts - One looking at the Indivision AGA MK2 on my Amiga 4000T, including the configuration needed to display on TFT screen correctly, and also a look inside of my Amiga 4000T:

http://amigax1000.blogspot.com.au/2015/08/indivision-aga-mk2-on-amiga-4000t.html

http://amigax1000.blogspot.com.au/2015/08/inside-my-a4000t.html

I hope you enjoy it! :-)

Catcha,
Epsilon

[Epsilon_]

Hi All,

I have created two new blog entries - one looking at a selection of  Classic Amiga software in 2015, and also a slightly offtopic one off  post about my new C64 with SD2IEC and Chameleon64!

Links are here:

http://amigax1000.blogspot.com.au/2015/08/selection-of-classic-amiga-software-in.html

http://amigax1000.blogspot.com.au/2015/08/my-commodore-64-has-arrived-with-sd2iec.html

I hope you enjoy them!



Catcha,
Epsilon

[Epsilon_]

Hi All,

Today I wrote a blog entry looking at the new installation of Icaros Desktop 2.0.3 on my Core i7 PC this week, with 2D/3D support and trying out the Odyssey 1.25 Beta too:

http://amigax1000.blogspot.com.au/2015/09/icaros-desktop-203-and-odyssey-125-beta.html

I hope you enjoy it! :-)

Catcha,
Epsilon

[Epsilon_]

Hi All,

Last night was the Adelaide Amiga meeting and also I got my X1000 back up and running. More information and pictures here:

http://amigax1000.blogspot.com.au/2015/09/adelaide-amiga-meeting-with-new-x1000.html

I hope you enjoy it! :-)

Catcha,
Epsilon

[Epsilon_]

Hi all,

I have updated my Amiga blog with a post looking at some NG Amiga games now that I have 3D support happening on AmigaOS4.1 and Icaros 2.0.3, as well as connecting a CDTV via HDMI and reconfiguring my computer area after pulling it apart for the Adelaide Amiga meeting last week!

http://amigax1000.blogspot.com.au/2015/09/computer-room-reconfiguration-and-ng.html

I hope you enjoy!

Catcha,
Epsilon

[Epsilon_]

Hi All,

Today I have written a new blog entry looking at AmiCraft Beta 3, recently released on AmigaOS4.1 on my X1000.

Link is here:

http://amigax1000.blogspot.com.au/2015/09/amicraft-beta-3-for-amigaos-41-on-x1000.html

I hope you enjoy it! :-)

Catcha,
Epsilon

[Epsilon_]

Hi All,

I have written a new blog post looking at Hollywood 6 for  AmigaOS 4.1 on the X1000. It also includes a quick look at Hollywood  plugin for Cubic IDE and FastView as well.

Link is here:

http://amigax1000.blogspot.com.au/2015/09/hollywood-6-for-amigaos-4-on-x1000.html

I hope you enjoy it!



Catcha,
Epsilon