Icaros 1.4.5 can run M68K software

[tft666]

When will more hardware be supported? Doesn't work on my

Laptop: Sony Vaio VPCEA2S1E
Notebook: Acer ApireOne 533

Seems pretty random what laptop it works on. Like why only some AspireOnes, and the older ones at that.

Got this old DELL Latitude D830 at work where it works.

The Hardware Compatibility in the manual makes no sense to me.

The Vaio has Intel Core i3-350M and ATI Mobility Radeon HD 5145
The manual says it supports i3 and ATI Radeon  (however not specific the 5000 series.)

The AspireOne 533 has Intel Atom Dual-Core N455 and  Intel GMA 3150 Graphics
The manual says is supports Atom and derivates and GMA3100

[tft666]

I boot from the CD.
After selecting any of the gfx modes under bootup I get the Cat with the message "No bootable media"

As it was the same thing on the Acer and Sony, but not the Dell, I assumed it was some display issue.

I'm glad to do some tests

[tft666]

1) the DVD drive is attached to a SATA controller which isn't recognized by the AROS kernel, hence it stops booting

AspireOne does not have a DVD drive, so using an internal SATA drive from a stationary PC, which I connect via SATA to USB connection.

VAIO has internal DVD, can not figure out how to change it to IDE. Little optiones to change anything in the Bios. Only the Boot sequence and some functions that don't lead to anything looking like SATA/IDE settings.

2) the DVD drive is attached to a USB controller which isn't well supported by Poseidon

Only the AspireOne goes thru USB. Don't know anything about if the controller is not well supported.

3) there is a memory card fitted in a drive somehow preventing the system to continue booting

Not that I know of. You mean like a CF card via IDE thing often used on Classic Amiga?

May you be more specific about your  most probable configuration? Is the DVD drive internal or external? Is your SATA controller configured to be used like a AHCI/RAID one, or as IDE? The latter configuration is more friendly to AROS but beware of changing it: if you have Windows already installed on another partition of the drive, it may stop booting until you set it to AHCI again.

See answers above. Is there a easy way to make a USB boot disk? Like one can with windows install CD?
Or do you know how to change the DVD drive to IDE on a Sony VAIO?

Shall we continue this "Icaros for Dummies" here, or at another suitable forum, like at support.icarosdesktop.org?  

[tft666]

1) change USB port. My AspireOne A150 behave quite differently if I use one of the two right side ports, and the one on the left side. I generally install from one of the right side ports.

That actually worked when trying the "External-Internal" DVD Drive from my stationary on the Sony Vaio. So that works now :=
Could not however get the AspONE 533 to work on any of the USB ports.
But I will continue trying. If I manage to install it on a USB pen,I can try that on the AspONE. Am I correct with that assumtion?
You don't need the DVD ISO to install on other computers with different hardware, as soon as you install it once on a USD Pen drive, you can try that USB on any computer?