Boot Logs of ExecSG Kernel on AmigaOne G3 and G4

[Rebel]

From Amigart.  The OS4 kernel boot log as witnessed, on the AmigaOne hardware at last weekends WOASE show.

 

[LaBodilsen]

Nice.    i especially like this:
"
TFTP from server 192.168.0.3; our IP address is 192.168.0.5
Filename '/tftpboot/os4.image'.
Load address: 0x500000
Loading:
"

LB

[odin]

...but if you take close attention the
the output, you'll see that it's actually booting on a G4... that log's
from a test run on a Amiga One XE board with a G4 7410...

Actually I find this more interesting  :-o :-D  :-o

Hmm....we need drool Smiley!

[SlimJim]

[,,,]
[StartExec] Let the good times roll !!! Multitasking enabled
[...]
 
:-D
.
SlimJim

[hnl_dk]

Have you seen this (G3):

[HAL_CalibrateTimer] Frontside bus frequency: 133 MHz
[HAL_CalibrateTimer] Internal frequency: 599 MHz

Have you seen this (G4):

[HAL_CalibrateTimer] Frontside bus frequency: 100 MHz
[HAL_CalibrateTimer] Internal frequency: 400 MHz

So it's not the same CPU module as they use on the AmigaOne-XE (G4) :-D

[hnl_dk]

Poster: SlimJim Date: 2002/11/5 21:33:01

[,,,]
[StartExec] Let the good times roll !!! Multitasking enabled
[...]

:-D
.
SlimJim

I like that one :-D

[Herewegoagain]

Quote:
--------------------------------------------------------------------------------

[HAL_CalibrateTimer] Frontside bus frequency: 100 MHz
[HAL_CalibrateTimer] Internal frequency: 400 MHz
--------------------------------------------------------------------------------

Yup, I noticed that right away.

[Rodney]

Gag me with CTRL_D
Blow me out of the water with CTRL_C

Theres many humorous msg's in there

[MoribundToot]

Its just so close!!! Can`t you smell it?!  I want it now!! :-D

[hnl_dk]

Exec on Amiga One G3 :

PPCBoot 1.1.6 (Oct 25 2002 - 12:31:12)

How will it look for the future???

Will it be renamed to U-boot, or will it continue as PPCBoot?

I sure hope it will continue as PPCBoot :-D

[strobe]

They probably changed the name before it's no longer PowerPC dependent.

I mean why not call it ARMBoot?

[L8-X]

Well I thought it was Das Boot :-o

(a fave movie of mine) :-D

[Rogue]

The G4 that we run on was a MPC 7410, which is one of the modules we have here for the XE but not the one that is going to be on the final version.  I wasn't sure how high this one goes, so we left it at 400 MHz to be sure the CPU's not fried :destroy:

Regards, Hans-Joerg.

[hnl_dk]

They probably changed the name before it's no longer PowerPC dependent.

I mean why not call it ARMBoot?

It should not be called ARMBoot, because:

1: The original name of the project was 8xxROM - not ARMBoot.

2: ARMBoot was made on basis of it's sister project (PPCBoot).

3: The AmigaOne PPCBoot was made on basis of PPCBoot 1.1.6, and not ARMBoot!

4: ARMBoot is no longer ARMBoot, but has merged with PPCBoot to U-Boot.

[hnl_dk]

The G4 that we run on was a MPC 7410, which is one of the modules we have here for the XE but not the one that is going to be on the final version. I wasn't sure how high this one goes, so we left it at 400 MHz to be sure the CPU's not fried :destroy:

Regards, Hans-Joerg.

Nice to hear that it is capable of running other CPU modules :-D

Do you know if it is capable of running standard CPU modules normally used in Apple Mac?